VALVE MATERIALS & SERVICE APPLICATIONS
VALVE MATERIALS & SERVICE APPLICATIONS Valve Casting Materials ASTM Casting Specification Common Designation Service Applications ASTM A216 Grade WCB
Link to this page:
Text of VALVE MATERIALS & SERVICE APPLICATIONS
Documents from same domain
www.australianpipelinevalve.com.au 70-78 Stanbel Road Salisbury Plain, South Australia 5109 Telephone +61 (0)8 8285 0033 Fax +61 (0)8 8285 0044
applications - valve seat seal materials, global
Refer to actual ASME chart for valve selection, this chart (updated as of 2012) is a general guide only. For PN ratings under ISO 75001-1 (AS4331) the pressure ...
asme b16.34 pressure / temperature ratings, ratings, pressure
SLIP ON RF DIMENSIONS (mm) ANSI B16.5 CLASS 2500 FLANGES Slip On RF Size Outside Diam. Bore Diam. Thick-ness Total Thick …
ansi b16.5 class 2500 flanges, slip, ansi b16.5 class 2500 flanges slip
GLOBAL SUPPLY LINE MSS SP-55 Quality Standard for Steel Castings for Valves, Flanges and Fittings and other Piping Components MSS SP …
major valve standards petrochemical, flanges
CHEMICAL COMPATIBILITY GUIDE Attached you will find 2 charts: 1 from Nibco® and 1 from FMC Technologies® Also go to our website for the best valve materials ...
chemical compatibility guide
www.australianpipelinevalve.com.au 70-78 Stanbel Road Salisbury Plain, South Australia 5109 Telephone +61 (0)8 8285 0033 Fax +61 (0)8 8285 0044 admin@ ...
api 600 trim number chart
304/304L STAINLESS VALVES Valves are manufactured in ASTM A182 304/304L forgings and ASTM A351 CF8/CF3 castings. Trim components can also be in UNS S30403 and AISI ...
valve materials, valves valves
Page 4 API6D-Valve-Inspection-Test R3 - AA 7-2. High Pressure Valve Seat Test (Hydrostatic) With the valve closed fully, test in both directions, one direction at a ...
valve inspection test, valve-inspection-test, test
ISO/API/ASME MANUFACTURING STANDARDS ISO 15761 has been recently published as part of an international effort to standardise the products for the
iso/api/asme manufacturing standards
GLOBAL SUPPLY LINE AVAILABLE VALVE BODY MATERIAL CATEGORIES Global Supply Line can supply valves in the following body materials: • Carbon Steel
1 The Use of FRP (Fiberglass-Reinforced Plastic) in Phosphate Fertilizer and Sulfuric Acid Processes Don Kelley Ashland Performance Materials
fiberglass-reinforced plastic) in phosphate fertilizer, sulfuric acid
Alloy 31 5 Re-Concentration of diluted Sulfuric Acid e.g. from Titanium Dioxide Plants The diluted sulfuric acid, byproduct in the production of titanium
alloy 31, sulfuric acid
4 / 6 For internal use only. Test Environment Temperature Length of Test Corrosion Rate Name Test conditions °F °C Days mpy mm / y Sulfuric Acid 40 % Sulfuric Acid ...
alloy 825 data sheet, sulfuric acid
2 - Type 254 SMO Type 254 SMO® - 3 where Type 316L or 317L has failed by pitting, crevice attack, or chloride stress corrosion cracking. In new construction, 254 SMO has
north version type 254 smo
Outokumpu 2507 UNS S32750 North American Version Imperial Units Design Features Very high strength High resistance to pitting, crevice, and general corrosion
outokumpu 2507 uns s32750
HASTELLOY ® C-2000 alloy 2 ©2005, Haynes International, Inc. HASTELLOY C-2000 alloy heat exchanger plate made for service in concentrated sulfuric acid
hastelloy c-2000 alloy, hastelloy ® c-2000 alloy, sulfuric acid
Contents Corrosion Problems and Alloy Solutions 1 Corrosion-Resistant Alloys from the Special Metals Group of Companies 4 Alloy Selection for Corrosive Environments 11
A. Plug valves or full-port ball valves are generally recommended for sulfuric acid service. Valves should be constructed of cast Alloy 20 for acid strength
equipment related faqs handling equipment, sulfuric acid, alloy, acid