Example: tourism industry

MATERIAL SAFETY DATA SHEET SAF POWER …

MATERIAL SAFETY DATA SHEET Description: SAF POWER Revision Number: 03 Document Number: MSDS P005 Prepared by: Sabelo Dladla Approved by: Doug Cutter

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Text of MATERIAL SAFETY DATA SHEET SAF POWER …

MATERIAL SAFETY DATA SHEET Description: SAF POWER Revision Number: 03 Document Number: MSDS P005 Prepared by: Sabelo Dladla Approved by: Doug Cutter Reviewed by: Zanele Mthimunye Revision Date: 09 June 2016 Status: Issued Issue Date: 09 June 2016 It is the responsibility of the user to verify that this copy is the latest version. HEAVY DUTY WATERBASED DEGREASER GENERAL SAF-POWER is a versatile, highly concentrated degreaser for effective cleaning of almost any surface. FORMULATION SAF-POWER is based on a balance of biodegradable, non-ionic and anionic surfactants, coupling agents, chelating and soil suspending inorganics. SAF-POWER contains a special sodium salt, which improves the products effectiveness over a wide range of applications as an anionic surfactant and as a powerful hydrotrope or solubilizer, especially because of its uniquely high solubility in aqueous solutions and its ability to be successfully blended with solvents like white spirits, or paraffin. PRODUCT DESCRIPTION TEST UNIT SPECIFICATION Appearance Green transparent liquid Density g/cm 1,060 - 1,100 pH NVC % m/m PROPERTIES * SAF-POWER is highly concentrated and can be diluted up to 1:200. * Due to the fact that SAF-POWER contains no free caustic, it is safe to use. * Being water based, SAF-POWER may be safely used on all hard surfaces. * SAF-POWER has non-corrosive properties. * The water based nature of SAF-POWER renders it non-flammable. * Special soil suspending agents in the formulation prevents the re-depositing of dirt removed by SAF-POWER leaving a clean oil-free surface. * SAF-POWER has the unique ability to be mixed either with water or with solvents such as paraffin. MATERIAL SAFETY DATA SHEET Description: SAF POWER Revision Number: 03 Document Number: MSDS P005 Prepared by: Sabelo Dladla Approved by: Doug Cutter Reviewed by: Zanele Mthimunye Revision Date: 09 June 2016 Status: Issued Issue Date: 09 June 2016 It is the responsibility of the user to verify that this copy is the latest version. APPLICATION Dilutions with water: SAF-POWER can be used as a floor cleaner by diluting it 1:200 with water for painted floors and 1:50 for concrete floors. Directions: 1) Dilute product as described above depending on the degree of dirt, sometimes a 1:10 dilution may be required. 2) Pour out a significant amount of the diluted mixture covering the area to be degreased or cleaned. 3) Allow the product to penetrate and lift the dirt if possible to reduce the need for agitation, if not possible the product can be agitated using a hard broom or any suitable material, after the entire area to be cleaned has been thoroughly agitated, the cleaned area can be rinsed with water using a high pressure washer, hose pipe or a bucket of water can also be utilised. 4) After ensuring that the floor has been thoroughly rinsed, allow the area to dry. When SAF-POWER is used through a steam-cleaner, the pre-dilution in the tank should be 1:20, whereas the final dilution at the end of the nozzle should be 1:200. For heavy duty degreasing (engine cleaning etc.) dilute SAF-POWER 1:20 with water. Directions: 1) Dilute the product as stipulated above and spray it on the area to be degreased using suitable spraying equipment or steam cleaner, avoid contact with electrical or electronic equipments or wires. 2) Warm water can also be used to reduce the need for mechanical action, rinse the degreased area with high pressure washer, hose pipe or with a bucket of water. Dilutions of 1:100 can be used for light duty degreasing. Paraffin Mixture: To combine the solvent properties of Paraffin with the rinsability and detergent cleaning strength of SAF-POWER in an economical mixture for cleaning engines, parts-washing etc. mix 1 part SAF-POWER with 10 parts Paraffin and 10 parts water. To prevent separation of this emulsion the mixture needs to be agitated at intervals. Rinse with water after cleaning. MATERIAL SAFETY DATA SHEET Description: SAF POWER Revision Number: 03 Document Number: MSDS P005 Prepared by: Sabelo Dladla Approved by: Doug Cutter Reviewed by: Zanele Mthimunye Revision Date: 09 June 2016 Status: Issued Issue Date: 09 June 2016 It is the responsibility of the user to verify that this copy is the latest version. THE RECOMMENDATIONS CONTAINED HERE-IN ARE BASED ON LABORATORY TESTS AND INFIELD USE EXPERIENCE AND ARE TO THE BEST OF OUR KNOWLEDGE ACCURATE. SINCE TERMS AND CONDITIONS OF ACTUAL USE ARE BEYOND OUR CONTROL, ALL RECOMMENDATIONS ARE MADE WITHOUT WARRANTY, EXPRESS OR IMPLIED. MATERIAL SAFETY DATA SHEET Description: SAF POWER Revision Number: 03 Document Number: MSDS P005 Prepared by: Sabelo Dladla Approved by: Doug Cutter Reviewed by: Zanele Mthimunye Revision Date: 09 June 2016 Status: Issued Issue Date: 09 June 2016 It is the responsibility of the user to verify that this copy is the latest version. Company Details Name (PTY) LTD Tel: (011) 406 4000 Address 32 Steele Street, Steeldale, JHB, 2067 Fax: (011) 406 4070 Postal Address PO BOX 1754, Alberton North, 1450 e-mail: 1. Product Identification Trade Name SAF-POWER Product code: P005 Chemical Family Water based degreaser (containing surfactants, chelating and soil suspending inorganics) Chemical Name Formulated chemical Product Use Cleaning and degreasing of most hard surfaces 2. Composition CAS No. Hazardous Components Approximate % OSHA PEL 1310-58-3 Potassium hydroxide < 5 CL 2 mg/m3 111-76-2 Glycol ether < 10 25ppm TWA; 120mg/m3 EEC classification Irritant (Xi), SAF-POWER R Phrases R36/37/38, SAF-POWER (No free potassium hydroxide available in formulation reacted with sulphonic acid) 3. Hazards Identification Main Hazard Irritant Fire Non-flammable Inhalation Excess spray coughing Skin contact Irritant. Prolonged or frequent contact may lead to defatting of skin Eye contact Irritant. Burning Ingestion Symptom: nausea & vomiting. 4. First Aid Measures Inhalation Move patient to fresh air. Skin contact Rinse area well with water. If necessary, use a hand-cream to replenish moisture. Eye contact Flush eyes with water for at least 15 minutes. Irrigate eyes thoroughly while lifting eyelids and rolling eyeballs. If irritation persists, seek medical attention. Ingestion Rinse mouth with water, and allow patient as much water as possible. If large quantities have been swallowed obtain medical attention. 5. Fire Fighting Measures MATERIAL SAFETY DATA SHEET Description: SAF POWER Revision Number: 03 Document Number: MSDS P005 Prepared by: Sabelo Dladla Approved by: Doug Cutter Reviewed by: Zanele Mthimunye Revision Date: 09 June 2016 Status: Issued Issue Date: 09 June 2016 It is the responsibility of the user to verify that this copy is the latest version. Product non-flammable. Use extinguishing agents suitable for surrounding fire. Self contained breathing apparatus or equivalent should be utilised should there be fire in surrounding area. 6. Accidental Release Measures As per good environmental management practices, prevent contamination of watercourses or ground with large quantities of undiluted product. Small spills Remove excess with absorbent material and flush residue with plenty of water. Large spills Dyke ahead of liquid spill for later disposal. Prevent the discharge of large amounts of concentrated product into sewerage, and watercourses. General When disposing large quantities, the alkaline nature of the product should be taken into consideration. 7. Handling & Storage Handling Normal handling procedure for heavy duty detergents to minimise personal exposure Storage Store in a cool dry area. Keep containers sealed. No special requirements. 8. Exposure Controls/Personal Protection Workers should have access to an eye wash fountain. If the specific application may result in splashing, safety goggles (VNC11 supplier MSA) should be utilised. Neoprene gloves (Technic 420-supplier MSA) should be utilised. Work in a well-ventilated area or 6300 type mask/6059 cartridge (3M supplier) should be utilised where ventilation isn t adequate. 9. Physical and Chemical Properties Appearance Clear green liquid pH Density Non volatile %m/m Solubility (water) 100 % 10. Stability and Reactivity Stability Stable under normal conditions. Incompatible materials Strong acids Hazardous decomposition products Toxic fumes may be liberated on decomposition 11. Toxicological Information (based on KOH) Toxicity Skin (human): 50 mg/24H SEV. Acute oral: LD50 = 365 mg/kg, rat MATERIAL SAFETY DATA SHEET Description: SAF POWER Revision Number: 03 Document Number: MSDS P005 Prepared by: Sabelo Dladla Approved by: Doug Cutter Reviewed by: Zanele Mthimunye Revision Date: 09 June 2016 Status: Issued Issue Date: 09 June 2016 It is the responsibility of the user to verify that this copy is the latest version. Carcinogenicity No evidence of carcinogenic properties Mutagenicity No evidence of mutagenetic effects Neurotoxicity No evidence of neurotic effects Reproductive hazard No hazard expected. 12. Ecological Information (based on glycol ether) Fathead minnow 96 hr bioassay LC50: 1700 mg/l Daphnia Magna 48 hr bioassay LC50: >1000 mg/l Bacterial IC50: > 5000 mg/l Biodegradability Biodegradation: 88 % 20 days Bio accumulation No possibility of bio accumulation. Other Information This material is not expected to be harmful to aquatic or marine organisms 13. Disposal Considerations Disposal methods identified are for the product as sold. For proper disposal of used material, an assessment must be completed to determine the proper and permissible waste management options permissible under applicable rules, regulations, and/or laws governing your location. Dilute product 1000 times and run to waste with plenty of water. When disposing of large quantities, the alkaline nature and solubility of the product in water (section 9) should be taken into consideration. Disposal of packaging Packaging should be recycled. 14. Transport Information Substance identity no P005 ADR/RID class Not Regulated Packaging group III Marine Pollutant No IMO/IMDG Classification Not Regulated IATA Classification Not Regulated 15. Regulatory Information EEC-hazard classification : Irritant (Xi) Risk phrases R36/37/38 Safety phrases S24/25 S36 16. Other Information References: SABS 0265:1999, SABS 0228:1995, SABS ISO 11014-1:1994, Sax Dangerous Goods, Raw Material Manufacturer s MSDS s. Issued by: Sabelo Dladla EMERGENCY NUMBERS: 011 406 4000 / 082 412 2298 MATERIAL SAFETY DATA SHEET Description: SAF POWER Revision Number: 03 Document Number: MSDS P005 Prepared by: Sabelo Dladla Approved by: Doug Cutter Reviewed by: Zanele Mthimunye Revision Date: 09 June 2016 Status: Issued Issue Date: 09 June 2016 It is the responsibility of the user to verify that this copy is the latest version. The information in this MSDS is based on current knowledge and experience at the date of publication. This MSDS summarises our best knowledge of the health and safety hazard information of the product and is intended only as a guide to the appropriate precautionary handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification of the product. The data relates only to the specific product designated, and does not relate to use of the product in combination with any other material or use of the product in any process. The data is not intended to constitute performance information concerning the product. No express warranty, or implied warranty of merchantability for fitness for a particular purpose is made with respect to the product, its composition, its safety or the information contained in this MSDS sheet. APPENDIX A Revision Date (dd/mm/yy) Issued By Revision History Revision No. Description DCN No. 11/02/2011 Technical Manager New Issue MSDS P005 00 20/05/2013 Technical Manager Document review and change of Company logo. MSDS P005 01 20/02/2016 Operations Director Review of risk on Section 14 MSDS P005 02 09/06/2016 Operations Director Review of risk on Section 12 MSDS P005 03

Related search results