Example: marketing


Revision date : March 23 2007 Nippon Paint(Thailand) Co.,Ltd. Pylac 3500 Thinner MATERIAL SAFETY DATA SHEET




Link to this page:

Please notify us if you found a problem with this document:

Other abuse


Revision date : March 23 2007Nippon Paint(Thailand) Co., 3500 ThinnerMATERIAL SAFETY DATA SHEET1. PRODUCT AND COMPANY IDENTIFICATIONProduct name:Pylac 3500 ThinnerIntended use:ThinnerManufacture:Company name:NIPPON PAINT(Thailand) CO.,LTDAddress:101 MOO 3 SOI SUKSAWAT 76,SUKSAWAT ROAD, ,SAMUTPRAKARN 10130Telephone No.:+66(0)2463-0032Facsimile No.:+66(0)2463-22142. COMPOSITION / INFORMATION ON INGREDIENTSChemical nature :Ingredient NameCAS (%)Toluene108-88-35-10n-butyl acetate123-86-410-15xylene1330-20-745-50 ketone108-10-15-10IBA78-83-110-15other solvent(s)proprietary1-5Note :*, +, @ = Carcinogenic according to criteria established by (*=NTP +=IARC @=OSHA)$ = Significant New Uses of Chemical Substances (SNUR). Section 721, Subpart E--Significant NewUses for Specific Chemical HAZARDS IDENTIFICATIONClassificationmost important hazardflammable liquid and vaporFlammable liquid and by in contact with hazardPossibly 1 of 5Revision date : March 23 2007Nippon Paint(Thailand) Co., 3500 Thinner4. FIRST-AID MEASURESInhalation:If inhaled, remove to fresh not breathing, give artificial breathing is difficult, give medical attention contact :In case of contact, immediately wash skin with plenty of water for at least 15 minutes while removing contaminated clothing and medical attention contact :In case of contact, immediately flush eyes with plenty of water for at least 15 :If swallowed, do NOT induce vomiting unless diredted to do so by medical medical attention FIRE-FIGHTING MEASURESDo NOT use water water spray or dry adjacent receptacles cool with copious quantities of fire-extinguishing media[ ] water fog.[ X ] CO2[ X ] foam[ X ] dry chemicals[ ] dry sandNote:Fire will produce dense black products may be hazardous to exposure and use breathing apparatus as closed containers exposed to fire by spraying them with not allow run off water and contaminants from fire fighting to enter drains or section ACCIDENTAL RELEASE MEASURESAvoid all sources of ignition ( lights, unprotected light bulbs, electric handtools).Ventilate the area and avoid breathing protective clothing and self-contained breathing apparatus when dealing with spillage or spillage, where practicable, for safe be disposed of wastes and empty containers in accordance with regulations made under the controlof pollution acts and the environmental protection spillage, where practicable, using absorbent material, and dispose of spillage on the floor in a away from drans, surface-and ground-water and not allow spills to enter drains or water to headings 8 and 13Page 2 of 5Revision date : March 23 2007Nippon Paint(Thailand) Co., 3500 Thinner7. HANDLING AND STORAGEHandling:Keep away from heat, sparks, and container product may charge electro should wear clothing which dose not generate static (at least 60% natural fiber) and antistatic food not greath (dust, vapor, must, gas).Avoid prolonged or repeated contact with as shown in section :Keep container away from heat, sparks and in a well-ventilated, dry place away from sources of heat and direct not store above 40 (104 )Avoid prolonged or repeated contact with EXPOSURE CONTROL / PERSONAL PROTECTIONEngineering Measures :Prevent vapor build up by providing adequate ventilation during and after eye wash facility should be readily storing or utilizing this material should be equipped with an eye washfacility and a safety limit :Ingredient NameTLVPELTWASTELTWASTELToluene50 ppm150 ppm200 ppm150 ppmn-butyl acetate150 ppm200 ppm150 ppm200 ppmxylene100ppm150ppm100ppm-Notes : (RD)=respirable dust. (C)=ceiling limit. (Skin)=skin of particles per cubic protection :Respiratory protection:Wear NIOSH-Approved appropriate protection:Wear imprevious protection:Wear chemical splash goggles and face shield when eye and facecontact is possible due to splashing or spraying of protection:Wear chemical resistant clothing such as gloves, apron, boots orwhold bodysuits made from neoprene, as exposure control :Do NOT let this product enter the 3 of 5Revision date : March 23 2007Nippon Paint(Thailand) Co., 3500 Thinner50509. PHYSICAL AND CHEMICAL PROPERTIESPhysical state:Solvent Color:ColourlessOdor:Solvent odorFlash point:4 oC (toluene)Ignition temperature:425 oC (n-Butyl acetate)Lower explosion limit:N/AUpper explosion limit:N/AVapor pressure:N/ASpecific / 25 oCVapor density:Heavier than airSolubility in water:none or poor in waterVolatile volume:100 %10. STABILITY AND REACTIVITYStability:Stable under recommended storage and handing conditions (seesection 7). When exposed to high temperature, may producehazardous decomposition products such as carbon monoxide,carbon dioxide, oxides of nitrogen and reaction:Hazardous reaction will not to avoid:Avoid heating temperatures above 40 to avoid:Keep away from oxidizing agents, strongly alkaline and stonglyacid materials in order to avoid possible exothermic decomposition products:The products decomposed on heating producing their oxide TOXICOLOGICAL INFORMATIONThere are no data available on the product information of ingredients :actute toxicity :xylenetolueneLD(oral,rat)>2000 mg/kgLD (oral,rat)>2000 mg/kg12. ECOLOGICAL INFORMATIONFor spiolls or waste, take care to avoid contaminating spills and wastewater from entering sewers, water courses or law areas to avoid are no data available on the product 4 of 5Revision date : March 23 2007Nippon Paint(Thailand) Co., 3500 ThinnerUn regulationShipping name:Storage temperature :Please refer to any other national measures that may be data available13. DISPOSAL CONSIDERATIONSThe products should not be allowed to inter drains and notification, clean-up and disposal should be carried out in accordance with federal, state and localregulations. Preferred method of waste disposal are incineration or biological treatment in federal/stateapproved facility. Wastes and empty containers should be disposed of in accordance with regulations madeunder the control or pollution acts and the environmental protection containers should be recycled or disposed of through an approved waste management is strongly advised not to let the chemical enter into the TRANSPORT INFORMATIONPAINT (including paing, lacquer, enamel, stain, shellac, varnish, polish,liquid filler and liquid lacquer base) or PAINT RELATED MATERIAL (including paint thinning or reducing compound)UN/ID No.:1263Class:3Packing group:IIStore bellow 40 ( )See section 7, Handling and REGULATORY INFORMATION16. OTHER INFORMATIONPage 5 of 5

Related search results