Example: biology

LNL TS 2220 063014 - Lenel.com

Intelligent Dual Reader Controller LNL-2220 Overview The LNL-2220 Intelligent Dual Reader Controller (IDRC) by Lenel provides a single board solution for interfacing ...




Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Text of LNL TS 2220 063014 - Lenel.com

Intelligent Dual ReaderControllerLNL-2220OverviewThe LNL-2220 Intelligent Dual Reader Controller (IDRC) by Lenel provides a single board solution for interfacing one or two doors to an OnGuard system. In addition, other I/O and reader interface modules can be added on the LNL-2220 s downstream port to expand its capabilities. The LNL-2220 revolutionizes access control system architecture by allowing Ethernet connection directly from an entry location to the OnGuard server, while still providing the security, functionality, and modularity of Lenel s proven hardware platform. The LNL-2220 is scalable for any access control application, from the most basic to the most sophisticated. In the event of communication loss, the LNL-2220 allows nearly all local functionality to continue unimpaired until the server connection is its native Ethernet communications and an advanced 32-bit processor, the LNL-2220 can communicate upstream to the host computer through its Ethernet port (with a throughput up to eight times greater than the fastest serial connections), or at up to Kbps using RS-232 communication directly or through an external dial-up modem. The LNL-2220 can store up to 250,000 cardholders in non-volatile flash memory, and supports selective download for larger cardholder databases. The downstream RS-485 two-wire port can be used to connect up to 32 devices (maximum 64 doors).Two on-board reader ports support Data1/Data0, Clock/Data, Bioscrypt RS-485 readers and the bidirectional RS-485 Open Supervised Device Protocol (OSDP) communications. Each LNL-2220 supports up to eight different card formats. The LNL-2220 includes eight inputs that support normally open, normally closed, supervised, and unsupervised circuits. In addition, four output relays support fail-safe or fail-secure & FUNCTIONALITYController Functionality On-board Ethernet 10/100Base-T port provides up to 8 times greater throughput than serial-to-Ethernet converters. DHCP and fixed IP addressing supported. DNS device naming through DHCP extended commands 6 MB of available on-board, non-volatile flash memory Battery-backed, non-volatile storage of 50,000 events Firmware stored in flash memory, background download of firmware updates supported Supports up to 16 different formats (8 card formats and 8 asset formats) Biometric template storage support for Schlage Recognition Systems , Bioscrypt , and Identix . Direct connection of Bioscrypt RS-485 devices Enhanced anti-passback capabilities Up to 32,000 access level permissions 255 holidays with grouping, 255 timezones, each with 6 intervals Elevator control support for up to 128 floors Individual extended held open and strike times (ADA required) Up to 9-digit user PIN codes 20 status LEDs 2 dedicated inputs for tamper and power failure status 12 or 24 VDC input power Advanced Encryption Standard (AES) 128-bit algorithm for communicationsReader Interface Functionality Supports Data1/Data0, Clock/Data and Lenel OSDP-compatible RS-485 readers and keypads 4 Form-C relay outputs, 5 A at 30 VDC Door contact supervision (open/closed) and REX push-button monitor for each door Strike control and auxiliary output for each door Bicolor reader status LED support plus beeper control, or 2-wire LED support On-board regulator allows 12 VDC reader power from 24 VDC power source(866) 788-5095Specifications subject to change without notice. 2014 Lenel Systems International, Inc. All rights reserved. All other trademarks and copyrights are the property of their respective FeaturesLNL-22206 MB On-board flash memory available for cardholder & asset database,50,000 event battery backed RAM for event logDial-Up ModemLNL-56KEXT56 K external modem with cablesLNL-DC336K12 VDC- K external modemSpecificationsPrimary Power (DC or AC)* The LNL-2220 is for use in low voltage, power-limited, class 2 circuits input:12 or 24 VDC 15%. 500 mA maximumAC input:12 VAC 15%. 400 mA RMSMemory and Clock backup3 V lithium, type BR2325, BR2330, CR2330Communication PortsPrimary (Ethernet) Port:10/100Base-T Ethernet high-speed portAlternate Upstream Port 1:RS-232 9600 to Kbps asyncDownstream Port 2:RS-485 (2-wire) 9600 to Kbps asyncInputsTamper and Power Fail Monitors:Unsupervised, dedicatedDoor position, REX, and AUX:8, each programmable as normally open or normally closed, supervised or unsupervised circuitsOutputsRelay outputs:4 Form-C 5 A at 30 VDC relay outputs: 2 strike, 2 auxiliaryReader PowerDC output:12 VDC, 125 mA regulated when 24 VDC powered, or 12 to 24 VDC 125 mA current limitedReader Port CompatibilityWiegand Data1/Data0, Magnetic Clock/Data, F/2F single-wire protocol, Bioscrypt RS-485,OSDP (Open Supervised Device Protocol RS-485)EnvironmentalTemperature:Operatin g: 32 to 158 F (0 to +70 C)Storage: -67 to 185 F (-55 to +85 C)Humidity:0 to 95% RHNCMechanicalDimensions:6 x 5 x 1 in. (152 x 127 x 25 mm)Weight:8 oz. (230 g) nominalApprovalsUL 294, CE-marked, RoHS compliantSupported ReadersSchlage Wireless - WA 5296, WA 5696, WA 5694, WA 993, WRI, WPRApprovals:FCC Part 15, CE, RoHS, UL 294, UL 1076, ULC , CAN/ULC-S319-05, cUL/ORD-C1076LNL-1300Single ReaderInterface ModuleLNL-1100Input Control ModuleUp to 16 Inputs per LNL-1100Motion SensorAlarmLNL-1200Output Control ModuleUp to 16 Outputs perLNL-1200RS-485 Multi-dropup to 4000 SystemController (ISC)Max 32 DevicesTCP/IP NETWORKOnGuardSecurity ServerOption ReaderInterface Module

Related search results