Example: bachelor of science

IMS300 SURVEILLANCE SYSTEM USER MANUAL ... - …

IMS300 Client User Manual 3 / 35 1 Introduction 1.1 System Introduction IMS300 is a professional surveillance system software which support muti-user, multi-window ...

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Text of IMS300 SURVEILLANCE SYSTEM USER MANUAL ... - …

IMS300 Client User Manual 1 / 35 IMS300 SURVEILLANCE SYSTEM USER MANUAL Introduction 1. Summary IMS300 Surveillance System User Manual introduces the software features and configuration operation of IMS300. Please go through this user manual before operating. 2. Symbol agreement The meaning of symbols hereinafter is as following Symbols Statement [ ] [] refers interface, menu and data sheet, [Add User] interface refers button, click OK Introduction: make some complement explanation to the contents. Warning:prompt the warning in order to avoid damage caused by improper operation. Note: prompt operation notes in order to avoid data loss and device damage caused by improper operation. IMS300 Client User Manual 2 / 35 TABLE OF CONTENTS 1 Introduction ........................................ ........................................ ........................................ ....................................... 3 System Introduction ........................................ ........................................ ........................................ ................ 3 Configuration requirement ........................................ ........................................ ........................................ ...... 3 2 Progarm Install ........................................ ........................................ ........................................ .................................. 4 3 Quick Guide ........................................ ........................................ ........................................ ....................................... 8 The client login ........................................ ........................................ ........................................ ....................... 8 Home Page Introduction ........................................ ........................................ ........................................ ......... 8 Device Management ........................................ ........................................ ........................................ ............... 9 Add Device ........................................ ........................................ ........................................ .......................... 9 Delect and Modify Device ........................................ ........................................ ........................................ . 12 4 Video Surveillance ........................................ ........................................ ........................................ ........................... 14 Real-time Video ........................................ ........................................ ........................................ .................... 14 Real-time preview ........................................ ........................................ ........................................ ...... 14 Local Video ........................................ ........................................ ........................................ ................ 15 PTZ Setting ........................................ ........................................ ........................................ ................ 16 5 Video Playback ........................................ ........................................ ........................................ ................................ 19 Video Playback ........................................ ........................................ ........................................ ..................... 19 Video cut and download ........................................ ........................................ ........................................ ....... 21 6 EMap ........................................ ........................................ ........................................ ........................................ ....... 24 Edit Map ........................................ ........................................ ........................................ ............................... 25 Add HotSpots ........................................ ........................................ ........................................ ........................ 27 Edit HotSpots ........................................ ........................................ ........................................ ........................ 28 7 Alarm Event ........................................ ........................................ ........................................ ..................................... 29 Event Center ........................................ ........................................ ........................................ ......................... 30 Event Handling ........................................ ........................................ ........................................ ..................... 30 8 Configuration Management ........................................ ........................................ ........................................ ............. 32 Basic Settings ........................................ ........................................ ........................................ ....................... 32 File Settings ........................................ ........................................ ........................................ .......................... 33 Plan Configuration ........................................ ........................................ ........................................ ................ 34 View Plan ........................................ ........................................ ........................................ ................... 34 9 User Management ........................................ ........................................ ........................................ ............................ 34 IMS300 Client User Manual 3 / 35 1 Introduction System Introduction IMS300 is a professional surveillance system software which support muti-user, multi-window and multi-language , voice talk, EMap, alarm and etc. IM300 is compatible with various access devices. This is a stable, reliable and easy operation system. IMS300 is software applications for embedded network CCTV monitoring equipment including NVR,IP Camera, IP Dome, PCNVR , decoding device and AV decoding card, it can support real-time preview, remote configuration, recording,playback, alarm, electric map and Simple Component Design Multiple components can be installed in one PC For a highly integrated. 550 end users System: Add as much as 50 end users, fully meet the various system permissions management solution. Find back the password with the super user permissions batch function. Interface container processing mode: Elaborate method of container handling, simplifies the screen and single switch, significantly improved screen operation experience. Channel management mode Add the channel management mode, adapt the IP monitoring more. Compatible with custom tools to generate configuration files. Consider more for UE Provide visual image type control panel based on the UE, reverse the USES the required type. Need only visible display mode:on client component interface elements,joined the need only visible display mode,the calendar,time,the toolbar,the system info,etc,.to join the design pattern. Configuration requirement Lowest requirement of client to run IMS300 see below table 1-1: Table 1-1 lowest configuration Parameter Introduction CPU Intel Pentium IV GHzor more RAM DDR3 1GB HDD Available space is more than 10 GB Operation System Microsoft Windows 7 Microsoft Windows Microsoft Windows 10 Display Resolution Resolution above 1024 768, suggest to use resolution of 1280 1024 Hardware support version above IMS300 Client User Manual 4 / 35 2 Progarm Install Below shows detailed installation procedure of IMS300 Step one: Double click to install this program; Step two: Complete the installation following the guide, click Next , see Figure 2-1 : Figure 2-1 IMS300 Client User Manual 5 / 35 Step Three: Change [Name] and [Company] click Next , see Figure 2-2: Figure 2-2 Step Four Select installation path, the default path is C:\Program Files (x86)\IMS300 , then click Next , see Figure 2-3 : Figure 2-3 IMS300 Client User Manual 6 / 35 Step Five Click Next ,see Figure 2-4: Figure 2-4 Step Six Click Next , see Figure 2-5: Figure 2-5 IMS300 Client User Manual 7 / 35 Step 7: Being installed files, please wait. see figure 2-6: Figure 2-6 Step 8 Click [Finish] the installation is complete. As shown in figure 2-7: Figure 2-7 IMS300 Client User Manual 8 / 35 3 Quick Guide The Client Login Double-clickto run it open login page, as shown in figure 3-1. Input Username and password, Click Login to log into the client. Figure 3-1 The client login Check Save password and Auto login , it will log in current user next time by default. Home Page Introduction Clients homepage as shown in figure 2-6, it can be divided into sub-window area, business logic, alarm statistics, tool sets, alarm event. IMS300 Client User Manual 9 / 35 Figure 3-2 Clients homepage Clickin right corner interface, switch to another user logged on to the client; Clickin right corner interface,lock the screen. After locking the screen not able to operate the client. To unlock, need to be in [the screen is locked, enter the current user name and password to unlock] enter the current username and password in the prompt box to unlock; Clickin right corner interface, client interface can be minimized interface display; Clickin right corner interface, client interface can be displayed in full screen; Clickin right corner interface, be able to exit the client. Device Management Add Device For the first time using the software, it is needed to add a device. Device online column shows all online device of current LAN. Method 1: 1 Click Resource Management Add Device , As shown in figure 3-3: IMS300 Client User Manual 10 / 35 FFifFigure 3-3 Resource Management 2 Complete device information,then click Save and Continue or Save then can see the device in the Managed Devices Figure 3-4 : Figure 3-4 Decive Information IMS300 Client User Manual 11 / 35 Method two 1 Click Resource Refresh , see Figure 3-5 : Figure 3-5 Managed Devices 2 Complete the previous operation, the online device will show in the Device Online,select device you wanna to add,then click Add , you will see added device in the Managed Devices,see Figure 3-6 : IMS300 Client User Manual 12 / 35 Figure 3-6 Managed Devices Delect and Modify Device In[Managed Devices]choose the added device,then click ,can delect the device. In[Managed Devices]choose the added device,then click,can modify the figure 3-7: IMS300 Client User Manual 13 / 35 Figure 3-7 Add the device s network parameter On this interface, user can change the device s parameter, like device s name, login type, device IP, device port, username, password and manufacturer etc. Then input administrator s password, and click Save to finish the parameter adding. IMS300 Client User Manual 14 / 35 4 Video Surveillance Real-time Video IMS300 support realtime preview, local recording, snapshot, PTZ control etc. Real-time preview Steps show as below: Step 1 click Realtime Monitor in business logic area, the system will show the realtime monitor interface; Step 2 In the device list at the right side of interface, choose the channel and drag to video window; It will show the realtime monitor interface in video window. See below figure 4-1 . Figure 4-1 Real-time Video IMS300 Client User Manual 15 / 35 No. Item Description 1 Stream Info Show the channel stream information 2 Shortcut Operations PTZ: control operations direction up, down, left, right, upper left, upper right, left blew, right blew; Recording: turn on or turn off (Recording document was default save under default software local recording path); Capture: capture current channel image (capture file was default save under default software local capture file path); Recording playback: used for current channel video; Region image: turn on or turn off electric enlargement; Talkback: turn on or turn off pronunciation talkback; Voice: turn on or turn off audio. 3 Local Used for switch local and video wall. 4 Picture segmentation mode Used for set screen segmentation mode. 5 Aspect Ratio Choose video aspect ratio, which used to adjust picture size to original ratio or fit window 6 Save View Saving current window layout and opened video source as the same image plan. After saving image plan, it can be performed at view plan of Plan Configuration 7 Wheel Guard Turn on or turn off current channel wheel guard 8 Full Screen Switch Video Window to full screen, double-click video window or press Esc or click right click to choose exit full screen . 9 Device Display equipment and channel . 10 PTZ Setting up PTZ preset point, point to point wheel guard and auxiliary function . Local Video Recording operation step: Step 1:Click video window at bottom right of real-time preview or right click to choose [open recording ]. IMS300 Client User Manual 16 / 35 Figure 4-2 Local video Step 2: Once recording finished, click or right click [closed recording]. Statement: Modify image default save path under basic setting document setting recording setting . PTZ Setting Achieving speed dome camera full range monitoring by setting PTZ direction, preset point and point to point wheel guard. Previewing speed dome camera monitoring image, click speed dome camera preview interface and the PTZ tabs at right side of the interface, the system display PTZ interface ,see figure 4-3. IMS300 Client User Manual 17 / 35 Figure 4-3 PTZ control Parameters Description 3D Positioning Opened 3D Positioning , controlling PTZ by mouse relative position in preset window. Mouse Simulating Using mouse to control eyeball camera.( the effect is same as Open PTZ ) Direction key Achieved 8 directions PTZ operation, up down left right upper left upper right, bottom left, bottom right. SIT three-dimensional positioning Clicking one point at video monitor interface, PTZ will turn to the point, and the point will move to middle point of screen, support zoom function , using mouse to drag in the monitor screen interface, drag frame support 1-36anamorphosis,pressing on mouse from upper left to bottom right, that will be larger,Pressing on mouse to drag, which from bottom right to upper left, that will be small . the frame size will be smaller,the multiple will larger, otherwise will be smaller. the function just only use mouse to control.) Step length Used for PTZ turning speed, achieve 1-8 different turning step length setting. Zoom Control speed dome camera and do zoom operation. Focusing aperture For focus control, adjust the clarity. Adjust speed dome camera aperture, adjust brightness Preset Using direction button to turn PTZ to needing position, entering preset result in preset frame, put the button to save. Point to point wheel guard Achieve different wheel guard auto carry out. Aux Function Light on/off Aux1 on/off, Aux2 on/off. IMS300 Client User Manual 18 / 35 Preset Setting Step 1 Moving camera to target position by clicking Direction Key Step 2 Click preset point tabs Step 3 Input preset point name. Step 4 Click Setting, current monitoring area of the camera will be one preset point Set other preset at drop-down menu by clicking [Position] Cruise Setting Step 1 Click [Cruise] Step 2 Click [New Cruise] pop up Step 3 After parameter setting, click [Save] See figure 4-4 Figure 4-4 New Cruise Select cruise at Cruise between points tab, Click, Cruise start; Click, Modify setting cruise line. IMS300 Client User Manual 19 / 35 5 Video Playback Recording could be checking by channel, time and different type and replay/edit. Video Playback Detailed playback operation steps Step 1 Click [Playback] (see Figure 3-2,section 2), it will show [Playback] interface see figure 5-1 Figure 5-1 Video playback No Item Description 1 Shortcut Key Screenshot Screenshot on current recording Area Image Elec-amplify on/off Voice Adjust voice of current recording. 2 Play Toolbar Stop Stop playback on current channel Pause Pause/play on current channel FF Fast forward on current channel; Synchronization Multi-channel replay Synchronization; Slow down Slow down replay on current channel Speed up Speed up replay on current channel. Stop all Stop all replay IMS300 Client User Manual 20 / 35 3 Window Shortcut Division Division current replay user-defined Full Screen Switch to Full Screen. 4 Time Schedule Control Left Time schedule move left Right Time schedule move right Zoom in Time schedule unit amplification Zoom out Time schedule unit reduced Watermark Watermark for current recording. 5 Time Schedule Bar Choose replay position on current channel. 6 Point Tree Device/channel display. 7 View Tree Date of recording 8 Advanced Search Recording searching. 9 Video Cut/Download Cut/Download Video. Step 2 Choosing device channel at upper right side. Step 3 Choosing starting/ending time, click [search] Available recording will be shown at time schedule bar when searching finished, Figure 5-2: Figure 5-2 Recording search Step 4 Choosing target channel, click , recording replay, see figure 5-3 IMS300 Client User Manual 21 / 35 Figure 5-3 Playback Video cut and download Step1 Clickfrom the clip download area( area of Diagram5-1) of Playback interface. Then mouse will show as in time bar Step2 Left click to select start point at the channel time bar which want to clip, Then left Click again at another position to select the end point. See figure 5-4 Figure 5-4 Video cut and download Step3 Right click at the time bar to select Plan Add after you select the starting point and end point Step4: Continue click at the video clip area ( area of figure5-1)), see figure 5-5; Figure 4-5 Video download Item Name Description Downloading Display the current progress of the download tasks Finish Display download task has been completed Start Start all download tasks in list Start/ Suspend Start to download current task Cancel Cancel download current task IMS300 Client User Manual 22 / 35 Open Open the folder which video download IMS300 Client User Manual 23 / 35 Step5 clickorTo download of editing video Step6 clickto check the video clip after downloaded, see figure 5-6 Figure 4-6 Finished list Item Name Instruction Delete all Remove all finished download in list Play Play currently finished download Open Open the folder where video download Cancel Remove currently finished download IMS300 Client User Manual 24 / 35 6 EMap EMap can quickly learn the location of the camera, and alarm host deployed, it is closely related to alarm function, when alarm occurs on the map, there is alarm hint, and according to this, we can take immediate protect action. Map add EMap associated with groud,a groud can add one EMap. The specific steps of the add EMap as below: Steps 1 Click EMap at window area(see figure 3-2 picturre 1) System display EMap interface,see figure 6-1: Figure 6-1 EMap Step 2 After add EMap name,click[Preview] to find pic file in PC, click [OK] to complete add ing figure 6-2: IMS300 Client User Manual 25 / 35 Figure 6-2 Map Add Step 3:After success to add EMap,it will turn to defulted [Preview Model].After add EMap,see figure 6-3: Figure 6-3 EMap Adding Complete Interface The map pic format should be png,jpg,or bmp. Edit Map The spcific steps of editing map as below: IMS300 Client User Manual 26 / 35 Step 1:Click [Edit Model] at toolbar, see figure 6-4: Figure 6-4 Edit Model Step 2:Click [Edit Map],see figure 6-5: Figure 6-5 Step 3: Choose map, modify the name and click Save to finish the map modification. Delete the current map operation: Click Edit Mode Delete Map to delete the current map in the menu. IMS300 Client User Manual 27 / 35 Add HotSpots Set submap of related map by hotspts configuration under editor state of the map. Adding hotspots steps Step 1: Click Add Hotspots under editor mode of the map ,see figure 6-6. Figure 6-6 Add HotSpots Step 2: Fill in the map name, click Browser to find the photos in the local PC, choose one photo and click OK to add this map ,see figure 6-7 IMS300 Client User Manual 28 / 35 Figure 6-7 HotSpots Adding Complete Interface When you finish all the above steps, you can click the hotspots icons to go into the submap. Edit HotSpots You can edit the hotspots when it is necessary: Step 1: Choose the hotspot you want to edit and click Edit Hotspot ,see figure 6-8 Figure 6-8 Edit HotSpots IMS300 Client User Manual 29 / 35 Step 2: Modify the name and photo of hotspots map, click Save to finish the modification. Delete current hotspot map operation: Click Edit Mode Delete Hotspot Map to delete the current map in the menu. IMS300 Client User Manual 30 / 35 7 Alarm Event There are two parts of alarm centre event, one is event center, another is event handling: Event Center IMS300 alarm center supports check and deal with all kinds alarm figure 5-1: Figure 7-1 Event Center Event Handling [Event Handling]Show event by channels IMS300 Client User Manual 31 / 35 Figure 7-2 Event Handling IMS300 Client User Manual 32 / 35 8 Configuration Management Basic Settings Configure the basic parameters of the client when users log in the IMS300 for the first time. Detailed process as described below: Step 1: Click [Basic Configuration] of Tool in the home page of the client. (See area 4 of Figure 3-2) [Basic Configuration] see figure 8-1: Figure 8-1 Basic Configurations Item Description Log save time Set the save time of log, 7day, 15days, 30days, 60days and 90days optional. Display Ratio Set the display ration of video. Full screen, original size, 16:9 and 4:3 optional. Play Performance Set play performance of video play and video realtime preview. Quality priority and fluent priority optional. Snapshot Format Set the picture format for sharpshooting and saving. JPEG and BMP optional. Time Scale Set time scale of client, 12-hour and 24-hour optional. Time Settings Set client time, sync local time by clicking sync time. SystemLanguage Set the language of client, Chinese and English optional. IMS300 Client User Manual 33 / 35 Step2 Click[save] after finish setting. Click [default] to reset local configuration File Settings Detailed process as described below: Step1: Click [Document Configuration] in the home page of the client(see figure 3-2 area 4). Basic Setting interface as figure 8-2: Figure 8-2 File Setting Name Parameter Description Audio Alarm Video Shade Set video shade alarm Motion Detection Set motion detection alarm Video Lost Set video lost alarm Tripwire Intrusion Set tripwire alarm Region Intrusion Set Region intrusion alarm Face Detection Set face detection Alarm Disk Error Set disk error alarm External Alarms Set external alarm File Path Capture Path Set save path of captured pictures Recording Path Set save path of recording videos Download Path Set save path of download video IMS300 Client User Manual 34 / 35 Configure Path Set save path of local configuration Step2: Click [Save] after finishing the settings. Click Reset to restore all file configuration to Plan Configuration View Plan Steps of plan configuration as following: Step1: Click [View Plan] on home page(See Area 2 of Figure3-2) [Plan settings] interface as figure 8-3: Figure 8-3 Plan settings 9 User Management Setting Steps as following: Detailed setting steps see below: Click [E-map] on home page( Area 1 of Figure3-2) Step1:Click [User management] on the tool list of home page User Management interface as figure 9-1: IMS300 Client User Manual 35 / 35 Figure 9-1 User Management

Related search results