Example: biology

Aquatrol, Inc.

Aquatrol Safety Relief Valves 3 Aquatrol, Inc. Aquatrol is an American based manufacturer of safety and relief valve products; soon to be celebrating our 70th year ...

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Text of Aquatrol, Inc.

Aquatrol Safety Relief Valves 2SeriesServicesCertifications7401/2 to 3 Brass/Bronze-320 -(196 )406 (208 )Yes300( )Air/Gas / Steam / LiquidASME VIII, CE, CRN7411/2 to 3 Stainless/Bronze-320 -(196 )425 (218 )Yes750( )Air/Gas / Steam / LiquidASME VIII, CE, CRN7421/2 to 3 Stainless/Carbon-20 -(29 )425 (218 )Yes750( )Air/Gas / Steam / LiquidASME VIII, CE, CRN7431/2 to 3 Stainless-320 -(196 )425 (218 )Yes750( )Air/Gas / Steam / LiquidASME VIII, CE, CRN691/2 to 3 Brass/SS/Bronze-20 -(29 )425 (218 )Yes450( )Water / LiquidNon-Code881/2 to 2 Brass/SS/Bronze-20 -(29 )406 (208 )Yes250( )Air / GasASME VIII891/2 to 2 Brass/SS/Bronze-20 -(29 )406 (208 )Yes250( )Air / GasASME VIII882-1/2 - 3 Stainless/Bronze-20 -(29 )406 (208 )Yes300( )Air / GasNon-Code892-1/2 - 3 Stainless/Bronze-20 -(29 )406 (208 )Yes250( )Air / GasNon-Code5601/2 to 2-1/2 Brass/Bronze-20 -(29 )406 (208 )Yes250( )SteamASME I, CE, CRN5631/2 to 2-1/2 Stainless/Bronze-20 -(29 )406 (208 )Yes250( )SteamASME I, CE, CRN5701/2 to 2-1/2 Brass/Bronze-20 -(29 )406 (208 )Yes300( )Air / Gas / SteamASME VIII, CE, CRN5731/2 to 2-1/2 Stainless/Bronze-20 -(29 )406 (208 )Yes300( )Air / Gas / SteamASME VIII, CE, CRN1201/2 - 3/4 - 1 Brass/Bronze-20 -(29 )406 (208 )No200( )Air / Gas / SteamASME VIII, CRN1301/4 -3/8 -1/2 Brass/Bronze-20 -(29 )406 (208 )No200( )Air / Gas / SteamASME VIII, CRN551/4 -3/8 -1/2 Brass/Bronze-20 -(29 )406 (208 )No200( )LiquidNon-Code1401/4 -3/8 -1/2 Brass/SS-20 -(29 )406 (208 )No450( )Air / Gas / SteamNon-CodeInletSizesAvailableMetalsMi n. Temp F ( C)Max. Temp F ( C)Soft SeatAvailableMax PressurePSI (Bar)Valve Selection GuideMultiplyByTo FindMultiplyByTo / / ^2kg / cm^ ^3Cubic Feet / ^3 / Feet / / / / MinCubic ^3 / ^3 / / / of of MercuryPounds / / hrFeet of / hr (Liquid).002 / / MinGallons3785Cubic of / cm^ of waterGallons (Water) / Feet / / x / hrCm^ ^2Gallons / / minInch^ ^2Gallons / Meters / hrInch^ ^ ( F-32) * 5 / 9CelsiusInches of ( C * ) + F 460 = C 273 =KelvinAquatrol Safety Relief Valves 3Aquatrol, is an American based manufacturer of safety and relief valve products;soon to be celebrating our 70th year anniversary. With this, we are proud to say that all products are manufactured right here, in the USA; allowing us to control all aspects of service and just as importantly, quality. Engineering, sales, manufacturing and assembly is done on-site and by an experienced team of safety and relief valve our customers to get what they need and when they need it . Our facilities include modern CNC manufacturing, robotics, in-house flow and capacity testing, CAD design and a myriad of other manufacturing specialties. We are growing to fit your , in 2014 is our Series 740 Safety Relief Valve line of products. This is a highcapacity, full nozzle valve, certified by the ASME (Section VIII) for Air-Gas-Steam and Liquid services. Pressures are available up to 750 PSI; with the ability to choose standard brass/bronze metals or carbon steel and stainless steel valve options. See page 4 for more addition of new product allows Aquatrol to crossover with all screwed orportable safety and relief valve manufactures; and, on a world-wide basis. Thedepth of our offering helps to choose the best fit solution for most applicationswithin the safety and relief valve industrial and commercial changing from our companies strengths, we strive to offer 100% of our productline in stock. Your valves can be built, set, tested and shipped on a just in time basis. While helping to reduce inventory and expenses, this allows our customersthe opportunity to make quick, accurate and timely look forward towards being of , Your Aquatrol Staff Please visit for expanded information. 4Aquatrol Safety Relief Valves 2/16/18Series 740 Safety ValvesSeries 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services: Liquid, Steam and Air/Gas. ASME and National Board Certified for Section VIII as well as CE and CRN Certifications. Pressures are to 750 PSI. Available with the full array of metal and seating 740Brass, bronze construction with stainless steel ring, seat (Disc) and Section VIII to 300 PSI for air/gas and liquid and 250 PSI for steam 741Stainless steel nozzle, ring, disc and springs. Bronze bonnet, and Section VIII to 750 PSI for Liquid and air/gas. 300 PSI for 742Stainless steel nozzle, ring, disc and springs. Carbon steel body and same as 741. Used as an all steel 743Same as 742, with stainless steel bonnet, body and where a stainless steel valve is :Features: Full nozzle Top guided design Short, precise blow-down Wide choice of inlet/outlet sizes Excellent re-seating characteristics Designed for heavy industrial use Closed hex cap Back-pressure tight Drain hole with threaded plug Cryogenic compatibleOptions: O-ring seating options (see charts) Packed lift lever Open lift lever BSPT Piping Tri-Clamp Inlets Full array of metal options API 527 SeatingPressure Vessels, Pumps, Hydraulics, Tanks, Steam Systems, Chemical, Cryogenic, Air and Gas Compressors, Separators,by-pass and over pressure protection. Choose for most industrial applications requiring a safety relief Safety Relief Valves 5Series 740 thru 743#DESCRIPTION7407417427431NozzleB16SA4 79-316 SSSA479-316 SSSA479-316 SS2Lock ScrewB16B16SA479-316 SSSA479-316 SS3Lower RingSA351-CF8MSA351-CF8MSA351-CF8MSA351- CF8M4Disc HolderB16B16SA479-316 SSSA479-316 SS5Lock Screw18-8 SS18-8 SS18-8 SS18-8 SS6Disc Holder ShaftB16B16SA479-316 SSSA479-316 SS7Disc GuideB16B16SA479-316 SSSA479-316 SS8BonnetB16B16SA108-1117/SA216SA479-316 SS9WasherPTFEPTFEPTFEPTFE10Seal WireSteel / LeadSteel / LeadSteel / LeadStainless / Lead11HoodB16B16SA108-1018SA479-316 SS12Pressure ScrewB16B16SA479-316 SSSA479-316 SS13Lock NutB16B16SA479-316 SSSA479-316 SS14Spring PlateB16B16SA479-316 SSSA479-316 SS15Spring302/17-7302/17-7302/17-7302/17 -716Spring PostB16B16SA479-316 SSSA479-316 SS17Spring Pin18-8 SS18-8 SS18-8 SS18-8 SS18Guide WasherPTFEPTFEPTFEPTFE19DiscSA479-316 SSSA479-316 SSSA479-316 SSSA479-316 SS20BodyB584-C84400B584-C84400SA216-WCBA 479-316 SS21Nozzle WasherPTFEPTFEPTFEPTFE22NameplateStainle ssStainlessStainlessStainless23WasherPTF EPTFEPTFEPTFESeries 740 thru 743OrificeInletOutletDNDimensions In. (mm) ( )1/2 3/4 15C(187)(206)(60)(41)2 ( ) ( )1/2 1 15D(187)(206)(60)(41)2 ( ) ( )3/4 3/4 20E(187)(206)(60)(41)2 ( ) ( )3/4 1 20F(187)(206)(60)(41)2 ( ) ( )1 1 25G(187)(206)(60)(41)2 ( ) ( )1/2 1 15A(206)9"(229)(67)2"(51)3 ( ) ( )1/2 1-1/4 15B(206)9"(229)(67)2"(51)3 ( ) ( )3/4 1 20C(206)9"(229)(67)2"(51)3 ( ) ( )3/4 1-1/4 20D(206)9"(229)(67)2"(51)3 ( ) ( )1 1 25G(206)9"(229)(67)2"(51)3 ( ) ( )1 1-1/4 25F(206)9"(229)(67)2"(51)3 ( ) ( )1-1/4 1-1/4 32H(206)(235)(73)2"(51)3 ( ) ( )1 1-1/2 25F(235)(244)(73)(57)5 ( ) ( )1-1/4 1-1/2 32H(235)(244)(73)(57)5 ( ) ( )1-1/2 1-1/2 40G(235)(244)(73)(57)5 ( ) ( )1-1/4 2 32G(260)(270)(86)(67)9 ( ) ( )1-1/2 2 40H(260)(270)(86)(67)9 ( ) ( )2 2 50F(260)(270)(86)(67)9 ( ) ( )1-1/2 2-1/2 40H(298)(308)(89)(73)16 ( ) ( )2 2-1/2 50J(298)(308)(89)(73)16 ( ) ( )2-1/2 2-1/2 65K(298)(308)(89)(73)16 ( ) ( )2 3 50J(362)(368)4"(102)(83)18 ( ) ( )2-1/2 3 65K(362)(368)4"(102)(83)18 ( ) ( )3 3 80L(362)(368)4"(102)(83)18 ( )Flow AreaIn2 (mm2) Lb (Kg)AClosed CapALift Lever7 3/8" 8 1/8" 2 3/8" 1 5/8" 7 3/8" 8 1/8" 2 3/8" 1 5/8" 7 3/8" 8 1/8" 2 3/8" 1 5/8" 7 3/8" 8 1/8" 2 3/8" 1 5/8" 7 3/8" 8 1/8" 2 3/8" 1 5/8" 8 1/8" 2 5/8" 8 1/8" 2 5/8" 8 1/8" 2 5/8" 8 1/8" 2 5/8" 8 1/8" 2 5/8" 8 1/8" 2 5/8" 8 1/8" 9 1/4" 2 7/8" 9 1/4" 9 5/8" 2 7/8" 2 1/4" 9 1/4" 9 5/8" 2 7/8" 2 1/4" 9 1/4" 9 5/8" 2 7/8" 2 1/4" 10 1/4" 10 5/8" 3 3/8" 2 5/8" 10 1/4" 10 5/8" 3 3/8" 2 5/8" 10 1/4" 10 5/8" 3 3/8" 2 5/8" 11 3/4" 12 1/8" 3 1/2" 2 7/8" 11 3/4" 12 1/8" 3 1/2" 2 7/8" 11 3/4" 12 1/8" 3 1/2" 2 7/8" 14 1/4" 14 1/2" 3 1/4" 14 1/4" 14 1/2" 3 1/4" 14 1/4" 14 1/2" 3 1/4" Aquatrol Safety Relief Valves 6SeriesMetalsServicesCertifications7401/ 2 to 3 Brass/Bronze-320 -(196 )406 (208 )300( )Air / Gas / Steam / LiquidASME VIII, CE, CRN7411/2 to 3 Stainless/Bronze-320 -(196 )425 (218 )750( )Air / Gas / Steam / LiquidASME VIII, CE, CRN7421/2 to 3 Stainless/Carbon-20 -(29 )425 (218 )750( )Air / Gas / Steam / LiquidASME VIII, CE, CRN7431/2 to 3 Stainless-320 -(196 )425 (218 )750( )Air / Gas / Steam / LiquidASME VIII, CE, CRNInletSizesMin. Temp F ( C)Max. Temp3,4 F ( C)Max Pressure1,2PSI (Bar)1)Maximum set pressure for steam service is 300 PSI ( Bar)2)Maximum set pressure for steam on Series 740 is 250 PSI ( Bar)3)Maximum temperatures depend upon seating )Contact Aquatrol for temps over 425 F (218 C)PTFE Seating#DESCRIPTION7407417427431NozzleB1 6SA479-316 SSSA479-316 SSSA479-316 SS3Lower RingSA351-CF8MSA351-CF8MSA351-CF8MSA351- CF8M4Disc HolderB16B16SA479-316 SSSA479-316 SS6Disc Holder ShaftB16B16SA479-316 SSSA479-316 SS24DiscPTFEPTFEPTFEPTFEO-Ring Seating#DESCRIPTION7407417427431NozzleB1 6SA479-316 SSSA479-316 SSSA479-316 SS3Lower RingSA351-CF8MSA351-CF8MSA351-CF8MSA351- CF8M4Disc HolderB16B16SA479-316 SSSA479-316 SS6Disc Holder ShaftB16B16SA479-316 SSSA479-316 SS25O-Ring DiscSA479-316 SSSA479-316 SSSA479-316 SSSA479-316 SS26Screw18-8 SS18-8 SS18-8 SS18-8 SS27Disc InsertSA479-316 SSSA479-316 SSSA479-316 SSSA479-316 SS28O-RingVariousVariousVariousVariousSe ating MaterialsMaterialNames*Use for:FKMViton-A-13 -(25 )446 (230 )NitrileBuna-N-40 -(40 )250 (121 )EPDM-40 -(40 )303 (151 )FFKMKalrez -10 -(23 )550 (288 )PTFE-300 -(184 )450 (232 )Cryogenic Service including Argon, Carbon Dioxide, Helium, Hydrogen, Nitrogen, Oxygen, SteamMin Temp F ( C)Max Temp F ( C)Acetone, Air, Alcohol, Benzine, Butane, Ethylene, Ethylene Glycol, Ethyl Alcohol, Gasoline, Isobutyl Alcohol, Kerosene, Lube Oil, Natural Gas, Naphtha, Nitrogen, Propane, Water, XyleneAir, Butane, Carbon Dioxide, Diesel Oil, Ethyl Chloride, Ethyl Ether, Fuel Oil, Gasoline, Helium, Hydrogen Sulphide, Kerosene, Natural Gas, Nitrogen, Oxygen (Gas), PropaneSteam, Water, Hot Water, Acetone, Beer, Brake Fluid, Hydrogen Gas, Sulfur Dioxide, Acids, AlkaliesAromatic Hydrocarbons, Chlorinated Hydrocarbons, Polar Solvents (ketones, esters, ethers), Inorganic and Organic Acids, Water, and Steam (Steam service up to 380 F (193 C) saturated)Note:This is just a partial for links to websites with more specific Safety Relief Valves 7Packed Lift Lever OptionsItemDescriptionMaterial OptionsBrassCarbon SteelStainless Steel1HandleB16 BrassB16 Brass/PlatedB16 Brass/Plated2Handle ScrewSteel/PlatedSteel/PlatedSteel/Plate d3CamB16 BrassSA479-316 SSSA479-316 SS4Retaining RingSteel/Plated17-7 SS17-7 SS5O-RIngsVitonVitonViton6Cam NutB16 BrassSA479-316 SSSA479-316 SS7O-RIngPTFEPTFEPTFE8HoodB16 BrassSA108-C1018SA479-316 SS9Jam Nut18-8 Stainless18-8 Stainless18-8 Stainless10Lifter NutB16 BrassSA479-316 SSSA479-316 SS11Hood SealPTFEPTFEPTFE12Plug18-8 Stainless18-8 Stainless18-8 Stainless13WasherPTFEPTFEPTFE14Gag Screw18-8 Stainless18-8 Stainless18-8 StainlessOpen Lift Lever OptionsItemDescriptionMaterial OptionsBrassCarbon SteelStainless Steel1HandleC1018/PlatedC1018/PlatedC101 8/Plated2HoodAnodized NutB16 BrassSA479-316 SSSA479-316 SS4Jam Nut18-8 Stainless18-8 Stainless18-8 Stainless5Lift Lever PinB16 BrassSA479-316 SSSA479-316 SS6SpringOptional Anti-Vibration SpringStainlessInlet / Lift Lever OptionsLifting Device as required by the ASME, ASME Section VIII: UG136(3)Each pressure relief valve on air, water at the valve inlet that exceeds 140 F (60 C), excluding over-pressure or relief events, or steam service shall have a substantial lifting device which when activated will release the seating force on the disc when the pressure relief valve is subjected to a pressure of at least 75% of the set pressure of the or BSPTTri-ClampNPT or BSPTInlet Options:Aquatrol Safety Relief Valves 8Series 740 thru 743 - Threaded Inlet Part Numbers740ED1V 3J1125SeriesDescriptionOrifice/Size IDConnectionSeatingCapServiceOptionsSet7 40Brass/BronzeDC-1/2 x 3/4 1-NPT MxFM-Metal1-Lift leverK-ASME VIII- SS/BronzeDD-1/2 x 1 2-NPT FxFP-PTFE2-Closed capL-ASME VIII-Steam2-742316 SS/Carbon DE-3/4 x 3/4 3-BSPT MxFR-PCTFE3-Packed lift leverJ-ASME VIII-Liquid743316 StainlessDF-3/4 x 1 4-BSPT FxFV-Viton4-P-CE - Air/gas3-O2 CleanedDG-1 x 1 8-BSPP MxFB-BunaE-CE - Steam4-API SeatingEA-1/2 x 1 9-BSPP FxFK-Kalrez5-D-CE - Liquid5-EB-1/2 x 1-1/4 E-EPDMN-Non-code Air/gasEC-3/4 x 1 6-T-Non-code Steam ED-3/4 x 1-1/4 U-Non-code LiquidEG-1 x 1 EF-1 x 1-1/4 EH-1-1/4 x 1-1/4 FF-1 x 1-1/2 FH-1-1/4 x 1-1/2 FG-1-1/2 x 1-1/2 GG-1-1/4 x 2 GH-1-1/2 x 2 GF-2 x 2 HH-1-1/2 x 2-1/2 HJ-2 x 2-1/2 HK-2-1/2 x 2-1/2 JJ-2 x 3 JK-2-1/2 x 3 JL-3 x 3 Series 740 thru 743 - Tri-Clamp Inlet Part Numbers743ED5M 1L1125SeriesDescriptionOrifice/Size IDConnectionSeatingCapServiceOptionsSet7 40Brass/BronzeDE-3/4 x 3/4 5-M-Metal1-Lift leverK-ASME VIII - SS/BronzeDF-3/4 x 1 P-PTFE2-Closed capL-ASME VIII - Steam2-742316 SS/Carbon DH-1 x 3/4 6-R-PCTFE3-Packed lift leverJ-ASME VIII - Liquid743316 StainlessDG-1 x 1 V-Viton4-P-CE - Air/gas3-O2 CleanedDJ-1-1/2 x 3/4 B-BunaE-CE - Steam4-API SeatingDK-1-1/2 x 1 K-Kalrez5-D-CE - Liquid5-EC-3/4 x 1 E-EPDMN-Non-code Air/gasED-3/4 x 1-1/4 6-T-Non-code Steam EG-1 x 1 U-Non-code LiquidEF-1 x 1-1/4 EJ-1-1/2 x 1 EK-1-1/2 x 1-1/4 FF-1 x 1-1/2 FG-1-1/2 x 1-1/2 GE-1 x 2 GH-1-1/2 x 2 HH-1-1/2 x 2-1/2 HJ-2 x 2-1/2 JG-1-1/2 x 3 JJ-2 x 3 ChromePlatingLift Lever withAnti-Vibe SpringClosed Capwith Test GagO2 Clean / API SeatingPacked Leverwith Test GagNote:This chart is forthreaded inlets x NPTChromePlatingTri-clamp x BSPTLift Lever withAnti-Vibe SpringClosed Capwith Test GagO2 Clean / API SeatingPacked Leverwith Test GagNote:This chart is forTri-Clamp inlets onlyAquatrol Safety Relief Valves 9Orifice area in^2 Flow Coefficient = .791Orifice area mm^2 Flow Coefficient = .791 D E F G H J D E F G H J . 740 thru 743 CapacitiesLiquid GPM ASME Section VIIISeries 740 thru 743 CapacitiesLiquid LPM ASME Section VIIISetPSISetBarLiquid CapacitySet pressures below 15 PSI ( Bar) are back-pressure is 10% of set pressure or 50 PSI ( Bar) whichever is Device as required by the ASME,ASME Section VIII: UG136(3)Each pressure relief valve on air, water at the valve inlet that exceeds 140 F (60 C), excluding over-pressure or relief events, or steam service shall have a substantial lifting device which when activated will release the seating force on the disc when the pressure relief valve is subjected to a pressure of at least 75% of the set pressure of the Safety Relief Valves 10Orifice area in^2 F low Coefficient = .878Orific e area in^2 Flow Coefficient = .878 D E F G H J D E F G H J . 740 thru 743 CapacitiesAir SCFM ASME Section VIIISeries 740 thru 743 CapacitiesAir Nm3/hr ASME Section VIIISetPSISetBarSet pressures below 15 PSI ( Bar) are back-pressure is 10% of set pressure or 50 PSI ( Bar) whichever is Device as required by the ASME,ASME Section VIII: UG136(3)Each pressure relief valve on air, water at the valve inlet that exceeds 140 F (60 C), excluding over-pressure or relief events, or steam service shall have a substantial lifting device which when activated will release the seating force on the disc when the pressure relief valve is subjected to a pressure of at least 75% of the set pressure of the CapacityAquatrol Safety Relief Valves 11Orifice area in^2 F low Coefficient = .878Orifice area in^2 Flow Coefficient = .878 D E F G H J D E F G H J . 740 thru 743 CapacitiesSteam Lbs/hr ASME Section VIIISeries 740 thru 743 CapacitiesSteam Kg/hr ASME Section VIIISetPSISetBarSet pressures below 15 PSI ( Bar) are back-pressure is 10% of set pressure or 50 PSI ( Bar) whichever is Device as required by the ASME,ASME Section VIII: UG136(3)Each pressure relief valve on air, water at the valve inlet that exceeds 140 F (60 C), excluding over-pressure or relief events, or steam service shall have a substantial lifting device which when activated will release the seating force on the disc when the pressure relief valve is subjected to a pressure of at least 75% of the set pressure of the Capacity12Aquatrol Safety Relief Valves 2/16/18Series 560/570 Safety ValvesOur 560 / 570 valve line is a high capacity safety valve used for boilers, piping lines and vessel protection. Designed and engineered for heavy-duty industrial use. ASME and National Board Certified for Section I and VIII as well as CE and CRN 560Use for ASME Section I applications, set pressure up to 250 PSI ( Bar).Boilers, or most areas where steam safety valves are 563Same as Series 560 except with Stainless Steel wetted trimming (Nozzle and Disc).Series 570ASME Section VIII, CE, CRN certified for unfired vessel pressure up to 300 PSI ( Bar) .Used for many applications to protect or relieve pressure for Air / Gas or 573Same as Series 570 except with Stainless Steel wetted trimming (Nozzle and Disc).Usages:Features: Designed for durability 6 orifices 12 sizes of piping options Top guided seating and discharge Full nozzle, high capacity levels Short, tuned blow-down with dual-ring technology Heavy duty hood and lever mechanism Standard 17-7 stainless steel springsOptions: O-ring seating options (see charts) Packed lift lever Stainless steel trimming package, nozzle, disc (all sizes) O-ring seating options (PTFE, EPDM, Viton, or as specified) Bubble tight seating options Anti-vibration spring for lift lever BSPT pipe threadingSteam Boilers, Air Compressors, Dryers, Receivers, Pressure Vessels, Piping Systems, Accumulators, Reducing Stations, Tanks, Inter/After Coolers, Cooking Equipment, Autoclaves, Sterilizers or wherever higher capacity pressure protection or relief may be Safety Relief Valves 13Series 560-563-570-573OrificeInletOutletDNDimen sions In. (mm) ( )1/2 3/4 15C(184)(64)(38) ( ) ( )3/4 3/4 20D(184)(64)(38) ( ) ( )3/4 1 20D(194)(64)(41)3 ( ) ( )1 1 25E(194)(64)(41)3 ( ) ( )1 1-1/4 25E(225)(73)(44)4 ( ) ( )1-1/4 1-1/4 32F(225)(73)(44)4 ( ) ( )1-1/4 1-1/2 32F(241)(83)(57)6 ( ) ( )1-1/2 1-1/2 40G(244)(83)(57)6 ( ) ( )1-1/2 2 40G11 "(279)(92)(64)10 ( ) ( )2 2 50H11 "(279)(92)(64)10 ( ) ( )2 2-1/2 50H(321)4 "(102)(79)15 ( ) ( )2-1/2 2-1/2 65J(321)4 "(102)(79)15 ( )Flow AreaIn2 (mm2) Lbs. (Kg)7 -1/4"2 1/2" 1 1/2" 7 1/4" 2 1/2" 1 1/2" 7 5/8" 2 1/2" 1 5/8" 7 5/8" 2 1/2" 1 5/8" 8 7/8" 2 7/8" 1 3/4" 8 7/8" 2 7/8" 1 3/4" 9 1/2" 3 1/4" 2 1/4" 9 5/8" 3 1/4" 2 1/4" 3 5/8" 2 1/2" 3 5/8" 2 1/2" 12 5/8" 3 1/8" 12 5/8" 3 1/8" Series 560 / 570 / 563 / 573ITEMDESCRIPTION560 / 570563 / 5731BodyB16/B62-C83600A479-316 SS2BonnetB584-C84400B584-C844003Lower RingB584-C84400B584-C844004Lock ScrewB16B165Upper RingB584-C84400B584-C844006Spring SupportB16B167Lift LeverSteel / PlatedSteel / Plated8Seal WireSteel / GalvanizedSteel / Galvanized9HoodAluminum / PlatedAluminum / Plated10Lifter NutB16B1611Jam Nut18-818-812Lever PinB16B1613Pressure ScrewB16B1614Lock NutB16B1615StemB16B1616Spring PlateB16B1617Spring17-717-718Disc NutB16B1619Ball Bearing44044020DiscB16A479-316 SS21Name PlateStainlessStainlessSeriesMetalsServi cesCertifications5601/2 to 2-1/2 Brass/Bronze-20 -(29 )406 (208 )250( )SteamASME I, CE, CRN5631/2 to 2-1/2 Stainless/Bronze-20 -(29 )425 (218 )250( )SteamASME I, CE, CRN5701/2 to 2-1/2 Brass/Bronze-20 -(29 )406 (208 )300( )Air / Gas / SteamASME VIII, CE, CRN5731/2 to 2-1/2 Stainless/Bronze-20 -(29 )425 (218 )300( )Air / Gas / SteamASME VIII, CE, CRNInletSizesMin. Temp F ( C)Max. Temp F ( C)Max PressurePSI (Bar)Aquatrol Safety Relief Valves 14Seating MaterialsMaterialNames*Use for:FKMViton-A-13 -(25 )446 (230 )NitrileBuna-N-40 -(40 )250 (121 )EPDM-40 -(40 )303 (151 )FFKMKalrez -10 -(23 )550 (288 )PTFE-300 -(184 )450 (232 )Cryogenic Service including Argon, Carbon Dioxide, Helium, Hydrogen, Nitrogen, Oxygen, SteamMin Temp F ( C)Max Temp F ( C)Acetone, Air, Alcohol, Benzine, Butane, Ethylene, Ethylene Glycol, Ethyl Alcohol, Gasoline, Isobutyl Alcohol, Kerosene, Lube Oil, Natural Gas, Naphtha, Nitrogen, Propane, Water, XyleneAir, Butane, Carbon Dioxide, Diesel Oil, Ethyl Chloride, Ethyl Ether, Fuel Oil, Gasoline, Helium, Hydrogen Sulphide, Kerosene, Natural Gas, Nitrogen, Oxygen (Gas), PropaneSteam, Water, Hot Water, Acetone, Beer, Brake Fluid, Hydrogen Gas, Sulfur Dioxide, Acids, AlkaliesAromatic Hydrocarbons, Chlorinated Hydrocarbons, Polar Solvents (ketones, esters, ethers), Inorganic and Organic Acids, Water, and Steam (Steam service up to 380 F (193 C) saturated)Note:This is just a partial for links to websites with more specific 560-563-570-573 Part Numbers573DC1M1L1250Series/DescriptionOr ifice/Size IDConnectionSeatingCapServiceOptionsSet5 60-DC-1/2 x 3/4 1-NPT MxFM-Metal1-Lift leverK-ASME VIII - x 3/4 2-NPT FxFP-PTFE3-Packed lift leverL-ASME VIII - Steam2-563-ED-3/4 x 1 3-BSPT MxFE-EPDM4-A-ASME I SteamEE-1 x 1 4-BSPT FxFV-VitonP-CE - Air/gas3-O2 Cleaned570-FE-1 x 1-1/4 8-BSPP MxFB-Buna6-E-CE - Steam4-API SeatingFF-1-1/4 x 1-1/4 9-BSPP FxFK-KalrezN-Non-code Air/gas5-573-GF-1-1/4 x 1-1/2 9-Easy Test LeverT-Non-code Steam GG-1-1/2 x 1-1/2 HG-1-1/2 x 2 HH-2 x 2 JH-2 x 2-1/2 JJ-2-1/2 x 2-1/2 Brass/bronzeSection IChromePlating316 SS/BronzeSection ILift Lever withAnti Vibe SpringBrass/bronzeSection VIIIPacked Lever with Test GagO2 Clean / API Seating316 SS/bronzeSection VIII22 23 24 25Soft Seat OptionSoft seat optionITEMDESCRIPTION560 / 570563 / 57322DiscB16A479-316 SS23O-RingVariousVarious24Center InsertB16A479-316 SS25Screw18-8 Stainless18-8 StainlessAquatrol Safety Relief Valves 15Orifice area in^2 F low Coefficient = .856Orific e area in^2 Flow Coefficient = .856 D E F G H J D E F G H J . 560 CapacitiesSteam Lbs/hr ASME Section ISeries 560 CapacitiesSteam Kg/hr ASME Section ISetPSISetBarSection I Steam CapacitySet pressures on steam below 15 PSI ( Bar) and above 250 PSI ( Bar) are I Lift levers can not be Device as required by the ASME:ASME Section I - safety valve shall have a substantial lifting device, which when activated will release the seating force on the disc when the valve is subjected to a pressure of at least 75% of the set Safety Relief Valves 16Orifice area in^2 F low Coefficient = .856Orific e area in^2 Flow Coefficient = .856 D E F G H J D E F G H J . 570 CapacitiesSteam Lbs/hr ASME Section VIIISeries 570 CapacitiesSteam Kg/hr ASME Section VIIISetPSISetBarSection VIII Steam CapacitySet pressures on steam below 15 PSI ( Bar) and above 250 PSI ( Bar) are Device as required by the ASME,ASME Section VIII: UG136(3)Each pressure relief valve on air, water at the valve inlet that exceeds 140 F (60 C), excluding over-pressure or relief events, or steam service shall have a substantial lifting device which when activated will release the seating force on the disc when the pressure relief valve is subjected to a pressure of at least 75% of the set pressure of the Safety Relief Valves 17Orifice area in^2 Flow Coefficient = .856Orifice area in^2 Flow Coefficient = .856 D E F G H J D E F G H J . 570 CapacitiesAir SCFM ASME Section VIIISeries 570 CapacitiesAir Nm3/hr ASME Section VIIISetPSISetBarSection VIII Air CapacitySet pressures on air below 15 PSI ( Bar) and above 300 PSI ( Bar) are Device as required by the ASME,ASME Section VIII: UG136(3)Each pressure relief valve on air, water at the valve inlet that exceeds 140 F (60 C), excluding over-pressure or relief events, or steam service shall have a substantial lifting device which when activated will release the seating force on the disc when the pressure relief valve is subjected to a pressure of at least 75% of the set pressure of the Safety Relief Valves 2/16/18Series 69 is a non-code, industry standard relief valve used for liquid relief and by-pass. Engineered and designed for heavy duty, industrial and commercial usages. A single piece bonnet to eliminate leakage while allowing for simple cleaning. Easy removable sealed hex-cap to adjust Range:Series 69 is available with a wider adjustable range (as an option). Valves are set to the mid-level pressure (or as specified). Typical wide-range is 150 PSI : Flow rates are not 69 Relief ValvesSeries 69Series 69 relief valves are calibrated (set to pressure) based on a range of flow-rates (GPM) versus seat size and set pressure. Standard valve is set to pressure to achieve flow rate maximum and minimums within each set pressure range. See capacity chart for :Features: Field adjustable by simple removal of the hex-cap Metal to metal precision lapped seating Back pressure tested at factory Ease of cleaning and maintenance with simple bonnet removal. Stainless steel springs Single piece leak free bonnetOptions: BSPT connections Female inlet Viton embedded o-ring at hex cap Packed lift lever Wide range WR adjustable (150 PSI increments) Stainless steel body and disk Low Lead Configurations (for a potable Water Relief Valve) PTFE Seating Adjustable wheel handle Tamper proof wire seal O2 CleaningInclude liquid by-pass, regulation, continuous relief and over-protection. Used on pumping stations, tanks, hydraulics, fluid / piping lines, oil fields, gas lines and more where a Liquid or Water Relief Valve is Safety Relief Valves 19Series 69ItemDescriptionBrass OptionStainless Option1BodyB16/B283316 Stainless2BonnetB584B5843BallStainlessSt ainless4DiscB62316 Stainless5NameplateStainlessStainless6Di sc NutB16B167Spring SupportB16B168Spring302/17-7302/17-79Spr ing PlateB16B1610WasherNylonNylon11HoodB16B1 612Pressure ScrewB16B1613Spring PostB16B1614Lock-nutB16B16Series 69Size In. (mm)ABCA11/2 1/2 156"(152)(64)(35) ( )A21/2 3/4 156"(152)(64)(35) ( )B13/4 3/4 20(159)(67)(38) (1)B23/4 1 20(159)(67)(38) (1)C11 1 25(187)(73)(44)3 ( )C21 1-1/4 25(187)(73)(44)3 ( )D11-1/4 1-1/4 32(210)(86)2"(51)4 ( )D21-1/4 1-1/2 32(210)(86)2"(51)4 ( )E11-1/2 1-1/2 40(241)(89)(54) ( )E21-1/2 2 40(241)(89)(54) ( )F12 2 5011"(279)(98)(67) ( )F22 2-1/2 5011"(279)(98)(67) ( )G12-1/2 2-1/2 6513"(330)(133)(92)19 ( )G22-1/2 3 6513"(330)(133)(92)19 ( )H13 3 80(337)(143)(92)19 ( )Weight Lb - (Kg)2 1/2" 1 3/8" 2 1/2" 1 3/8" 6 1/4" 2 5/8" 1 1/2" 6 1/4" 2 5/8" 1 1/2" 7 3/8" 2 7/8" 1 3/4" 7 3/8" 2 7/8" 1 3/4" 8 1/4" 3 3/8" 8 1/4" 3 3/8" 9 1/2" 3 1/2" 2 1/8" 9 1/2" 3 1/2" 2 1/8" 3 7/8" 2 5/8" 3 7/8" 2 5/8" 5 1/4" 3 5/8" 5 1/4" 3 5/8" 13 1/4" 5 5/8" 3 5/8" "A""B""C"1 3 4 6 7 9 810 11 12 135 2Female Connections"A" Dimensions same as Male1 4 2Aquatrol Safety Relief Valves 20PTFE Soft SeatItem Description Material1BodyB16/C37715SupportB1616DiscB 1617InsertPTFE18Disc WingsB16118171615Packed Lift Lever OptionsItemDescriptionMaterial OptionsBrassCarbon SteelStainless Steel1HandleB16 BrassB16 Brass/PlatedB16 Brass/Plated2Handle ScrewSteel/PlatedSteel/PlatedSteel/Plate d3CamB16 BrassSA479-316 SSSA479-316 SS4Retaining RingSteel/Plated17-7 SS17-7 SS5O-RIngsVitonVitonViton6Cam NutB16 BrassSA479-316 SSSA479-316 SS7O-RIngPTFEPTFEPTFE8HoodB16 BrassSA108-C1018SA479-316 SS9Jam Nut18-8 Stainless18-8 Stainless18-8 Stainless10Lifter NutB16 BrassSA479-316 SSSA479-316 SS11Hood SealPTFEPTFEPTFE12Plug18-8 Stainless18-8 Stainless18-8 Stainless13WasherPTFEPTFEPTFE14Gag Screw18-8 Stainless18-8 Stainless18-8 StainlessOpen Lift Lever OptionsItemDescriptionMaterial OptionsBrassCarbon SteelStainless Steel1HandleC1018/PlatedC1018/PlatedC101 8/Plated2HoodAnodized NutB16 BrassSA479-316 SSSA479-316 SS4Jam Nut18-8 Stainless18-8 Stainless18-8 Stainless5Lift Lever PinB16 BrassSA479-316 SSSA479-316 SS6SpringOptional Anti-Vibration SpringStainlessBSPPNPT or BSPTNPT or BSPTInlet Options:Aquatrol Safety Relief Valves 69 Liquid CapacityGPM at 25% Over Set PressureSeries 69 Liquid CapacityLPM at 25% Over Set PressureFlowFactorFlowFactorA1/2 B3/4 C1 D1-1/4 E1-1/2 F2 G2-1/2 H3 A1/2 B3/4 C1 D1-1/4 E1-1/2 F2 G2-1/2 H3 Series 69 Part Numbers69C1A 1M 3U1 125SeriesInletOutletMetalsConnectionSeat ingCapServiceOptionsSet69A-1/2 1-A-Brass/Bronze1-NPT MxFM-Metal1-Lift B-2-NPT FxFP-PTFE2-Closed cap2-C-1 2-3-BSPT MxF3-Packed lift leverD-1-1/4 L-4-BSPT FxF4-3-E-1-1/2 8-BSPP MxFF-2 M-9-BSPP FxF5-G-2-1/2 H-3 6-8-W-Wheel HandleSame Sizeas InletNon-CodeLiquid316 SS Nozzle-Disc w/BronzeChromePlatingNext Largerthan InletNo Lead Nozzle-Disc w/BronzeLift Lever Anti-Vibration SpringO2 Cleaned316 SS/ No Lead BronzeClosed Capwith Test GagPacked Leverwith Test GagClosed CapWith O-Ring22Aquatrol Safety Relief Valves 2/16/18Series 88 and 89 are multiple purpose safety valves for air / gas protection. Designed for durability, yet an economical choice for safety and relief applications. Choose for a variety of applications where mid-level capacity is and National Board Certified for Section VIII as well as CRN 88 Safety ValvesSeries 88 / 89Usages:Features: Adjustable tuned blow-down Precision lapped metal to metal seating Stainless steel springs Ruggedly constructed Closed seal hex cap or lift lever options Wide variety of inlet and outlet options Disk-guided seat provides quick, accurate and excellent re-seatingOptions: Stainless steel body and disk Chrome plating Viton embedded o-ring at hex cap Packed lift lever Low Lead Configurations PTFE Seating Oxygen cleaning BSPT connectionsCryogenic: Standard with PTFE seating O2 Cleaned and baggedOver pressure protection on Pressure vessels,Piping systems, Tanks, Compressors, Dryers, Inter and After-coolersCRNAquatrol Safety Relief Valves 23Series 88 / 89ItemDescriptionBrassStainless1BodyB16/ B283316 Stainless2DiscB62316 Stainless3BonnetB584B5844Lock ScrewB16B165Lower RingB584B5846BallStainlessStainless7Disc NutB16B168Spring SupportB16B169Lift LeverPlated SteelPlated Steel10Seal WireSteel / LeadSteel / Lead11HoodAluminumAluminum12Lifter NutB16B1613Jam Nut18-818-814Lever PinB16B1615Pressure ScrewB16B1616LocknutB16B1617Spring PostB16B1618Spring PlateB16B1619Spring302/17-7302/17-720Nam eplateStainlessStainless21HoodB16B1622Wa sherNylonNylon"A""B""C"1 3 4 5 8 911 12 13 14 15 16 17 18 197 6 210SEAL16 151/2" - 3/4"Lift Levers1/2" & 3/4"Series 8921 15 2221 22Series 8916 15Series 88 / 89Size In. (mm)A-88A-89BCA11/2 1/2 15(175)6"(152)(64)(35) ( )A21/2 3/4 15(175)6"(152)(64)(35) ( )B13/4 3/4 20(181)(159)(67)(38) (1)B23/4 1 20(181)(159)(67)(38) (1)C11 1 25(200)(187)(73)(44)3 ( )C21 1-1/4 25(200)(187)(73)(44)3 ( )D11-1/4 1-1/4 32(222)(210)(86)2"(51)4 ( )D21-1/4 1-1/2 32(222)(210)(86)2"(51)4 ( )E11-1/2 1-1/2 40(251)(241)(89)(54) ( )E21-1/2 2 40(251)(241)(89)(54) ( )F12 2 50(286)11"(279)(98)(67) ( )F22 2-1/2 50(286)11"(279)(98)(67) ( )G12-1/2 2-1/2 65(352)13"(330)(133)(92)19 ( )G22-1/2 3 65(352)13"(330)(133)(92)19 ( )H13 3 80(352)(337)(143)(92)19 ( )Weight Lb - (Kg)6 7/8" 2 1/2" 1 3/8" 6 7/8" 2 1/2" 1 3/8" 7 1/8" 6 1/4" 2 5/8" 1 1/2" 7 1/8" 6 1/4" 2 5/8" 1 1/2" 7 7/8" 7 3/8" 2 7/8" 1 3/4" 7 7/8" 7 3/8" 2 7/8" 1 3/4" 8 3/4" 8 1/4" 3 3/8" 8 3/4" 8 1/4" 3 3/8" 9 7/8" 9 1/2" 3 1/2" 2 1/8" 9 7/8" 9 1/2" 3 1/2" 2 1/8" 11 1/4" 3 7/8" 2 5/8" 11 1/4" 3 7/8" 2 5/8" 13 7/8" 5 1/4" 3 5/8" 13 7/8" 5 1/4" 3 5/8" 13 7/8" 13 1/4" 5 5/8" 3 5/8" Aquatrol Safety Relief Valves 24Series 88 / 89 Part Numbers88C2A 1M 1K 1 125SeriesInletOutletMetalsConnectionSeat ingCapServiceOptionsSet88A-1/2 1-A-Brass/Bronze1-NPT MxFM-Metal1-Lift B-2-NPT FxFP-PTFE2-Closed cap2-C-1 2-3-BSPT MxF3-Packed Lift LeverN-D-1-1/4 L-4-BSPT FxF4-3-O2 CleanedE-1-1/2 8-BSPP MxFT-4-API SeatingF-2 M-9-BSPP FxF5-5-G-2-1/2 H-3 6-8-Same Sizeas InletASME VIII Air/gas316 SS NozzleDisc w/BronzeChromePlatingNext Largerthan InletNon-code Air/gasNo Lead NozzleDisc w/BronzeLift Lever Anti-Vibration SpringNon-code Steam316 SS/ No Lead BronzeClosed Capwith Test GagO2 Clean / API SeatingPacked Leverwith Test GagClosed Capwith O-Ring123524 25 26PTFE Soft SeatItemDescriptionBrassStainless1BodyB1 6/B283316 Stainless5Lower RingB584B58423Disc WingsB16316 Stainless24InsertPTFEPTFE25DiscB16316 Stainless26SupportB16B16Packed Lift Lever OptionsItemDescriptionMaterial OptionsBrassCarbon SteelStainless Steel1HandleB16 BrassB16 Brass/PlatedB16 Brass/Plated2Handle ScrewSteel/PlatedSteel/PlatedSteel/Plate d3CamB16 BrassSA479-316 SSSA479-316 SS4Retaining RingSteel/Plated17-7 SS17-7 SS5O-RIngsVitonVitonViton6Cam NutB16 BrassSA479-316 SSSA479-316 SS7O-RIngPTFEPTFEPTFE8HoodB16 BrassSA108-C1018SA479-316 SS9Jam Nut18-8 Stainless18-8 Stainless18-8 Stainless10Lifter NutB16 BrassSA479-316 SSSA479-316 SS11Hood SealPTFEPTFEPTFE12Plug18-8 Stainless18-8 Stainless18-8 Stainless13WasherPTFEPTFEPTFE14Gag Screw18-8 Stainless18-8 Stainless18-8 StainlessAquatrol Safety Relief Valves 88 / 89 Air CapacitySCFM @ 10% over Set PressureSeries 88 / 89 Air CapacityNm3/hr @ 10% over Set PressureSetPSIA1/2 B3/4 C1 D1-1/4 E1-1/2 F2 G2-1/2 H3 SetBarA1/2 B3/4 C1 D1-1/4 E1-1/2 F2 G2-1/2 H3 Set pressures below 15 PSI ( Bar) and above 250 PSI ( bar) are back-pressure is 10% of set pressure or 50 PSI ( Bar) whichever is Device as required by the ASME,ASME Section VIII: UG136(3)Each pressure relief valve on air, water at the valve inlet that exceeds 140 F (60 C), excluding over-pressure or relief events, or steam service shall have a substantial lifting device which when activated will release the seating force on the disc when the pressure relief valve is subjected to a pressure of at least 75% of the set pressure of the Capacities26Aquatrol Safety Relief Valves 2/16/18Our Series 120 air/gas and steam safety valve is designed for safety and pressure relief for light and medium capacity applications where a smaller sized valve is needed. The series 120 valves have a higher capacity than our Series 130. Many are manufactured to meet specific field and OEM and National Board Certified for Section VIII as well as CRN 120 Safety ValvesUsages:Features: Fixed blow-down Brass/bronze construction Metal-to-metal seating Rugged, yet economical Stainless steel springs Factory set and sealed Excellent seat tightnessOptions: Stainless body and disk Polishing and chrome plating Oxygen cleaning Variety of inlets/outlets and lift levers or pull ring Many configurations (not shown) Oxygen cleaning BSPT connectionsHigh quality smaller valve, Compressors, Receivers, Gas lines,Steam lines, Air and Gas receivers, Piping system/tanks,Steam cleaners, sterilizers, AutoclavesSeries 120 - 126CRNSet pressures below 15 PSI ( Bar) and above 200 PSI ( bar) are back-pressure is 10% of set pressure or 50 PSI ( Bar) whichever is Device as required by the ASME,ASME Section VIII: UG136(3)Each pressure relief valve on air, water at the valve inlet that exceeds 140 F (60 C), excluding over-pressure or relief events, or steam service shall have a substantial lifting device which when activated will release the seating force on the disc when the pressure relief valve is subjected to a pressure of at least 75% of the set pressure of the Safety Relief Valves 27Series 120 thru 126Item Description Brass Option Stainless Option1Body B16 316 Stainless2Disc Bronze 316 Stainless3Seal Wire Steel/Lead Steel/Lead4Lock Screw B16 B165Bonnet Bronze Bronze6SupportStainless Stainless7Spring PlateBrassBrass8Lift Lever Plated Steel Plated Steel9SpringStainless Stainless 10Spring Post B16 B1611Lift Pin B16 B1612Nameplate Stainless Stainless 13HoodBronze Bronze 14Lever PinB16 B16 15Hood MountB16 B16 Series 120Series 121Series 125Series 126SeriesInletOutletSeatDimensions Inches (mm)ABC1201/2 Top3/4 (89)-(38)200 ( ).5(.23)1203/4 Top3/4 (89)-(38)200 ( ).6(.28)1201 Top3/4 (89)-(38)200 ( ).6(.28)120*1 Top1 (95)-(38)200 ( ) (.51)1211/2 Top3/4 (105)-(35)200 ( ).8(.34)1213/4 Top3/4 (105)-(35)200 ( ).9(.40)1211 Top3/4 (105)-(35)200 ( ).9(.40)121*1 Top1 (114)-(35)200 ( ) (.57)1251/2 3/4 3/4 (89)(57)(29)200 ( ).5(.23)1253/4 3/4 3/4 (89)(57)(29)200 ( ).6(.28)1251 3/4 3/4 (89)(57)(29)200 ( ).6(.28)125*1 1 1 (95)(67)(35)200 ( ) (.51)1261/2 3/4 3/4 (105)(57)(29)200 ( ).5(.23)1263/4 3/4 3/4 (105)(57)(29)200 ( ).6(.28)1261 3/4 3/4 (105)(57)(29)200 ( ).6(.28)126*1 1 1 (114)(67)(35)200 ( ) (.51)* 1 seat is non-codeSeries 120 thru 126Max. SetPSI (Barg)WeightLbs (Kg)3 1/2" 1 1/2" 3 1/2" 1 1/2" 3 1/2" 1 1/2" 3 3/4" 1 1/2" 4 1/8" 1 3/8" 4 1/8" 1 3/8" 4 1/8" 1 3/8" 4 1/2" 1 3/8" 3 1/2" 2 1/4" 1 1/8" 3 1/2" 2 1/4" 1 1/8" 3 1/2" 2 1/4" 1 1/8" 3 3/4" 2 5/8" 1 3/8" 4 1/8" 2 1/4" 1 1/8" 4 1/8" 2 1/4" 1 1/8" 4 1/8" 2 1/4" 1 1/8" 4 1/2" 2 5/8" 1 3/8" A B A B A B C A B C Aquatrol Safety Relief Valves Seat1 Seat*Bar3/4 Seat1 Seat* Seat1 Seat*Bar3/4 Seat1 Seat* * 1 Seat is Non-CodeSeries 120 thru 126Air Capacity SCFM @ 10%Over Set PressureSeries 120 thru 126Air Capacity Nm3/hr @ 10%Over Set PressureSeries 120 thru 126Steam Capacity #/Hr @ 10%Over Set PressureSeries 120 thru 126Steam Capacity kg/hr @ 10%Over Set PressureSeries 120 thru 126 Part Numbers121BA1M 1K1125Series/DescriptionInlet/OutletMeta lsConnectionSeatingCapServiceOptionsSet1 20A-1/2 A-1-NPT MxFM-Metal1-Lift 2-NPT FxFH-2-121C-1 B-3-BSPT MxFL-*D-1 x 1 4-BSPT FxF3-L-8-BSPP MxFN-125A-1/2 x 3/4 9-BSPP FxFB-3/4 x 3/4 M-T-126C-1 x 3/4 *D-1 x 1 Top Outletw/Lift LeverBrassBronzeASME VIIIAir/gasHood andLift LeverChromePlatingTop Outlet HoodAnd Lift Lever316 SSBronzeASME VIIISteamO2CleanedNo LeadBronzeNon-codeAir/gasSide Outletw/Lift Lever316 SSNo LeadNon-codeSteam Side Outlet HoodAnd Lift LeverSet pressures below 15 PSI ( Bar) or above 200 PSI ( Bar) are non-codeInlet/Outlet D are non-code valves29Aquatrol Safety Relief Valves 2/16/18Our Series 130 air/gas and steam safety valves are designed for safety and pressure relief for light and medium capacity applications; where a smaller sized valve is needed. Many are manufactured to meet specific field and OEM applications. ASME and National Board Certified for Section VIII as well as CRN 130 Safety ValvesUsages:Features: Fixed blow-down Brass/bronze construction Metal-to-metal seating Rugged, yet economical Stainless steel springs Factory set and sealed Excellent seat tightnessOptions: Stainless body and disk Polishing and chrome plating Oxygen cleaning Variety of inlets/outlets and lift levers or pull ring Oxygen cleaning BSPT connectionsCompressors, Receivers, Gas lines, Steam lines, Air and Gas receivers, Piping system/tanks, Steam cleaners, sterilizers, AutoclavesSeries 130 - 135Set pressures below 15 PSI ( Bar) and above 200 PSI ( bar) are back-pressure is 10% of set pressure or 50 PSI ( Bar) whichever is Device as required by the ASME,ASME Section VIII: UG136(3)Each pressure relief valve on air, water at the valve inlet that exceeds 140 F (60 C), excluding over-pressure or relief events, or steam service shall have a substantial lifting device which when activated will release the seating force on the disc when the pressure relief valve is subjected to a pressure of at least 75% of the set pressure of the Safety Relief Valves 30Series 130 thru 135Item Description Brass Option Stainless Option1Body B16 316 Stainless2Disc Bronze 316 Stainless3Seal Wire Steel/Lead Steel/Lead4Lock Screw B16 B165Bonnet Bronze Bronze6SupportStainless Stainless7Spring PlateBrassBrass8Lift Lever Plated Steel Plated Steel9SpringStainless Stainless 10Spring Post B16 B1611Lift Pin B16 B1612Nameplate Stainless Stainless 13HoodBronze Bronze 14Lever PinB16 B16 15Hood MountB16 B16 Series 130Series 132Series 133Series 135Series 130, 132, 133, 135SeriesInletOutletSeatDimensions Inches (mm)ABC1301/4 Top1/2 (83)-(38)200 ( ) 1/2(.2)1303/8 Top1/2 (83)-(38)200 ( ) 5/8(.3)1301/2 Top1/2 (83)-(38)200 ( ) 5/8(.3)1321/4 Top1/2 (98)-(35)200 ( ) 3/4(.3)1323/8 Top1/2 (98)-(35)200 ( ) 7/8(.4)1321/2 Top1/2 (98)-(35)200 ( ) 7/8(.4)1331/4 1/2 1/2 (95)(48)(35)200 ( ) 1/2(.2)1333/8 1/2 1/2 (95)(48)(35)200 ( ) 5/8(.3)1331/2 1/2 1/2 (95)(48)(35)200 ( ) 5/8(.3)1351/4 1/2 1/2 3"(76)(44)(29)200 ( ) 1/2(.2)1353/8 1/2 1/2 3"(76)(44)(29)200 ( ) 5/8(.3)1351/2 1/2 1/2 3"(76)(44)(29)200 ( ) 5/8(.3)Max. SetPSI (Barg)WeightLbs (Kg)3 1/4" 1 1/2" 3 1/4" 1 1/2" 3 1/4" 1 1/2" 3 7/8" 1 3/8" 3 7/8" 1 3/8" 3 7/8" 1 3/8" 3 3/4" 1 7/8" 1 3/8" 3 3/4" 1 7/8" 1 3/8" 3 3/4" 1 7/8" 1 3/8" 1 3/4" 1 1/8" 1 3/4" 1 1/8" 1 3/4" 1 1/8" A B C A B C A C A C Aquatrol Safety Relief Valves 31Slope = = SizesBarAll = = SizesBarAll 130 thru 135Air Capacity SCFM @ 10%Over Set PressureSeries 130 thru 135Air Capacity Nm3/hr @ 10%Over Set PressureSeries 130 thru 135Steam Capacity #/Hr @ 10%Over Set PressureSeries 130 thru 135Steam Capacity kg/hr @ 10%Over Set PressureSeries 130 thru135 Part Numbers130BA1M 1K1125Series/DescriptionInlet/OutletMeta lsConnectionSeatingCapServiceOptionsSet1 30A-1/4 A-1-NPT MxFM-Metal1-Lift 2-NPT FxF2-2-132C-1/2 B-3-BSPT MxFL-4-BSPT FxFH-3-L-8-BSPP MxFN-133A-1/4 x 1/2 9-BSPP FxFB-3/8 x 1/2 M-T-135C-1/2 x 1/2 Top Outletw/Lift LeverBrassBronzeASME VIIIAir/gasClosed CapChromePlatingTop Outlet HoodAnd Lift Lever316 SSBronzeASME VIIISteamHood andLift LeverO2CleanedNo LeadBronzeNon-codeAir/gasSide Outlet HoodAnd Lift Lever316 SSNo LeadNon-codeSteam Side OutletClosed Cap32Aquatrol Safety Relief Valves 2/16/18A ball-seated safety valve used for applications wherehigher capacity may be required with a smaller sized , tested and built for heavy-duty : Currently non-ASME codeSeries 140 Safety ValvesUsages: Stainless Steel Ball Disc Fixed blow-down Factory preset to specified pressuresFeatures: Pressures to 450 Economical Stainless Steel Spring Stainless Steel Ball Disc Fixed blow-down Factory preset to specified pressuresOptions: BSPT Inlet Female Inlet Oxygen Cleaning Full Stainless Steel ConstructionSeries 140Aquatrol Safety Relief Valves 33Series 140ItemDescriptionBrass OptionStainless Option1BodyB16 Brass316 Stainless2DiskStainless440 Stainless3Disk HolderB16 Brass316 Stainless4Name PlateAluminumAluminum5Spring PlateB16 Brass316 Stainless6Pressure ScrewB16 Brass316 Stainless7Pull RingPlated SteelPlated Steel8Spring PostB16 Brass316 Stainless9HoodB16 Brass316 Stainless10Lock NutB16 Brass316 Stainless11SpringA313-302 SS302 / 17-712BonnetB16 Brass316 StainlessSeries 140 Part Numbers140B A 1M 7N1125Series / DescriptionInletMetalsConnectionSeatingC apServiceOptionsSet140BrassA-1/4 A-Brass1-NPT MaleM-Metal1-Lift B-316 SS2-NPT Female7-Pull Ring2-C-1/2 3-BSPT MaleT-142316 Female3-8-BSPP Male9-BSPP FemaleNon-code Air/gas316 Steam O2CleanedPSISCFMPSISCFMBarNm3/hrBarNm3/h r102021018914017374202822019826118395303 7230206382194164045240215410320437505425 0223512421457606226023261442247880793002 6581862452010096340299102282656212011336 0316112492758314013038033312270286031601 4740035013290296241801644203671431130645 190172440384153323166620018145039216353S eries 140 CapacityAir SCFM @ 10% over set pressureSeries 140 CapacityAir Nm3/hr @ 10% over set pressureAquatrol Safety Relief Valves 34Packed Lift Lever OptionsItemDescriptionMaterial OptionsBrassCarbon SteelStainless Steel1HandleB16 BrassB16 Brass/PlatedB16 Brass/Plated2Handle ScrewSteel/PlatedSteel/PlatedSteel/Plate d3CamB16 BrassSA479-316 SSSA479-316 SS4Retaining RingSteel/Plated17-7 SS17-7 SS5O-RIngsVitonVitonViton6Cam NutB16 BrassSA479-316 SSSA479-316 SS7O-RIngPTFEPTFEPTFE8HoodB16 BrassSA108-C1018SA479-316 SS9Jam Nut18-8 Stainless18-8 Stainless18-8 Stainless10Lifter NutB16 BrassSA479-316 SSSA479-316 SS11Hood SealPTFEPTFEPTFE12Plug18-8 Stainless18-8 Stainless18-8 Stainless13WasherPTFEPTFEPTFE14Gag Screw18-8 Stainless18-8 Stainless18-8 StainlessOpen Lift Lever OptionsItemDescriptionMaterial OptionsBrassCarbon SteelStainless Steel1HandleC1018/PlatedC1018/PlatedC101 8/Plated2HoodAnodized NutB16 BrassSA479-316 SSSA479-316 SS4Jam Nut18-8 Stainless18-8 Stainless18-8 Stainless5Lift Lever PinB16 BrassSA479-316 SSSA479-316 SS6SpringOptional Anti-Vibration SpringStainlessLift Lever OptionsEasy Test Lever OptionsItemDescriptionMaterial OptionsBrassCarbon SteelStainless Steel1HandleC1018/PlatedC1018/PlatedC101 8/Plated2HoodB16B16B163Lift WasherB16 BrassB16 BrassB16 Brass4Cotter Pin18-8 Stainless18-8 Stainless18-8 Stainless5Spring PostB16B16B16Lifting Device as required by the ASME, ASME Section VIII: UG136(3)Each pressure relief valve on air, water at the valve inlet that exceeds 140 F (60 C), excluding over-pressure or relief events, or steam service shall have a substantial lifting device which when activated will release the seating force on the disc when the pressure relief valve is subjected to a pressure of at least 75% of the set pressure of the lever options for Series 69, 88, 560 thru 573, 740 thru 743Easy Test Lever for Series 560 thru 573 onlyPacked lever not available on Series 560 thru 563Aquatrol Safety Relief Valves 35Options (See Each Particular Valve For Details) Packed Lift Levers Soft Seating, O-Ring Seating Female Inlets Over-sized Inlets Various Steel(s) and Brass Grades BSPT Connections Polishing/Chrome Plating Closed Caps (as applicable by ASME code) Others Tri-ClampIndustries Served (By Aquatrol Valves) Chemical/Pharmaceutical Marine/Mining Power/Energy Water Works Manufacturing Food/Beverage Construction Oil/GasOur Guarantee/WarrantyUnless otherwise agreed upon, Aquatrol valves are guaranteed for a period of 1 year from shipment. The guarantee covers all parts and labor. The guarantee applies to valves properly used under industry standards for sizing and usages. Aquatrol will not be held responsible for any form of incidental or consequential damages. Our valves all ship FOB, Elburn, IL. Unless otherwise specified, we will choose the most efficient manner of : CAD files of valves / Cut sheets Operating and installation manuals Basic sizing guidelines Cleaning instructions Flow/pressure charts /metric Glossary of safety and relief valve terms AND INDUSTRY GATEWAYS (LINKS) TO-Chemical compatibility charts-Equivalency links-VMA-The National Board-ASMEAquatrol, : : Valve Series Size x Outlet Steam, Air, Gas or Options If Pressure Point2/16/18 01:02 PM

Related search results