Example: bankruptcy

All Purpose Gear Lube 80w90 & 85w140 - …

All Purpose Gear Lube 80w90 & 85w140 All Purpose gear lubricants are multi-functional EP gear oils that give superior perfor-mance both in highway vehicles and off ...

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Text of All Purpose Gear Lube 80w90 & 85w140 - …

All Purpose Gear Lube 80w90 & 85w140 All Purpose gear lubricants are multi-functional EP gear oils that give superior perfor-mance both in highway vehicles and off-highway farm and construction equipment. They are made from high quality base oils combined with a completely new sulfur-phosphorus, multi-functional gear oil additive package. They are available in two grades: SAE 80W-90 and 85W-140. All Purpose gear lubricants are suitable for use in limited-slip or "Posi-Trac" rear axles as a refill or top-off fluid Features/Benefits: Multipurpose to satisfy the lubricant requirements of a wide variety of gears. High load carrying capacity. Extreme pressure lubricant additives for hypoid and heavily loaded gears. Excellent oxidation stability and wear properties. Long life is assured for bearings, gears and seals especially under high temperature operations. Provides good moisture corrosion protection. Minimize lubricant inventory. Compatible with other gear oils and can be used in axles and transmissions. One driveline fluid can be inventoried. Potential energy savings. The low friction properties of All Purpose Gear Lube make significant energy conservation possible. Will not harm brass bearings, even above 200 F where many sulfur-type additives cause corrosion. All Purpose gear lubricants are recommended primarily for passenger car, bus, and highway truck hypoid, spiral bevel, and worm gear axles, but can also be used in manual transmissions when this type of fluid is recommended. Additional Information on Reverse All Purpose Gear Lube 80w90 & 85w140 Applications/Specifications: All Purpose Gear Oils Meet or Exceed the following specifications: Fleet/Automotive Industrial MIL-L-2105D Steel 224 CS 3000B AGMA MACK GO-H API GL-4 (lower dosage) Rockwell International 0-76-D (80w90), 0-76-A (85w140) Case IH MS-1316 (SAE 85w140) John Deere JDM J11E Typical Physical Specifications: SAE Grade 80W-90 85W-140 AGMA No. (approx.) 4EP 7EP API Service Classification GL-5 GL-5 API Gravity @ 60 F 27 Viscosity Index 85 85 Viscosity: cSt @ 100 C 20 30 cSt @ 40 C 270 510 SUS @ 210 F 98 143 SUS @ 100 F 1250 2360 Pour Point, C ( F) -25 (13) -12 (10) Flash Point, C ( F) 200 (395) 220 (430) Color, ASTM 4 Timken OK Load, Pounds 45 45

Related search results