Example: bachelor of science

Aeroquip Convoluted Teflon Hose - Eaton

Aeroquip® Convoluted Teflon ® Hose Combines the routing flexibility of light weight rubber hose with the temperature range and fluid compatibility of Teflon ® hose.

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Text of Aeroquip Convoluted Teflon Hose - Eaton

Aeroquip Convoluted Teflon Hose Combines the routing flexibility of light weight rubber hose with the temperature range and fluid compatibility of Teflon EATON Aerospace Group TF100-21D April 2013 EATON Aerospace Group TF100-21D April 2013 3AE641 Hose, AE441/AE443 Hose, AE541 Hose & AE841 Hose Design Features 2 - 3Flared Fittings 4Hose Assemblies/Swivel Flared to Swivel Flared 5Flareless Fittings 6Hose Assemblies/Swivel Flareless to Swivel Flareless 7Assembly Hose Part Number Information 8Table of Contents4 EATON Aerospace Group TF100-21D April 2013 Design Features Increase flexibility excellent for use where a tight bend radius is required Lightweight Crimp fitting design pro-vides excellent retention and sealing characteristics Operating temperatures: -65 F to +400 F (-54 C to +204 C) TSO C53a, Type A and Type C and TSO C75, Type II-A-S/P approvals Available with integral silicone fire protection cover and integral polyester chafeguard Available in wide size range, -4 through -32 Qualified to AS620 and AS1055 Available with flared and flareless style end fittings (mates with AS4395 and AS33514 end connections) Contact Eaton for other end fitting design : Convoluted Teflon inner tube with conductive inner liner. Corrosion resistant stainless steel wire braid : Hydraulic return, fuel, engine oil and coolant lines for aircraft and ground support Temperature Range: -65 F to +400 F (-54 C to +204 C)Basic Specification: AS620; TSO C53a, Type A; TSO C75, Type II-A-S/P HoseConstruction: AE641 hose overlaid with a blue braided chafeguard cover of tough polyester : Hydraulic return, fuel, engine oil and coolant lines for aircraft and ground support Temperature Range: -65 F to +300 F (-54 C to +149 C)Basic Specification: AS620 standards with the exception of upper temperature range limits; TSO C53a, Type A; TSO C75, Type II-A-S/P HoseConstruction: AE641 hose with an integral cover of silicone rubber : Hydraulic return, fuel, engine oil and coolant lines for aircraft and ground support Temperature Range: -65 F to +400 F (-54 C to +204 C)Basic Specification: AS620; AS1055, Type IIb, Class B; TSO C53a, Type C and TSO C75, Type II-A-S/P-F HoseConstruction: AE641 hose overlaid with a thin wall integral cover of silicone rubber : Hydraulic return, fuel, engine oil and coolant lines for aircraft and ground support Temperature Range: -65 F to +400 F (-54 C to +204 C)Basic Specification: AS620; AS1055, Type IIb, Class B; TSO C53a, Type C; TSO C75, Type II-A-S/P-F HoseEATON Aerospace Group TF100-21D April 2013 5Design FeaturesMinimum Bend Radius ComparisonHose Dimensions and Performance DataHOSE FITTINGAE641 Hose (Max.)AE441 Hose (Max.)AE443 Hose (Max.)AE841 (Max.)AE541 (Max.)Hose (Min.)Minimum Bend Radius (inches)Vacuum Data(max. inches Hg.)Operating Pressure(PSI/MPA)Proof Pressure (PSI/MPA)Minimum Burst Pressure(PSI/MPA)AE641 Hose Wt. ( ) (Kgs/M)AE441 Hose Wt. ( ) (Kgs/M)AE443 Hose Wt. ( ) (Kgs/M)AE841 Hose Wt. ( ) (Kgs/M)AE541 Hose Wt. ( ) (Kgs/M)-4 -6 -8 -10 -12 -16 -20 -24 -32All dimensions in bend radius values shown are for standard operating pressures. Contact Eaton for reduced bend radius recommendations at lower operating AS620(AE641 Hose)MIL-H-25579(Conventional Smooth Bore)Contact Eaton for alternative fitting Fitting Material SpecificationsNut CRES, AMS 5639 (304)Wire CRES, AMS 5685 (305)Nipple CRES, AMS 5639 (304) for sizes -6 through -10Nipple CRES, AMS 5659 (15 - 5PH) for sizes -12 through -32Socket CRES, AMS 5639 (304).477 .587 .787 .882 .860 .803 .532 .640 .840 .950 .355 .520 .600 .790 .990 28 28 28 28 28 20 12 51000 1000 1000 1000 1000 1000 1000 750 2506,89 6,89 6,89 6,89 6,89 6,89 6,89 5,17 1,722000 2000 2000 1800 1800 1800 1800 1500 50027,58 27,58 24,82 24,82 24,82 24,82 20,68 6,894000 4000 3600 3600 3600 3600 3600 3000 100013,79 13,79 13,79 12,41 12,41 12,41 12,41 10,34 3, .008 .013 .017 .026 .032 .040 .050 .066,143 ,142 ,231 ,303 ,463 ,570 ,712 ,890 1,775 --- .113 2, .019 .028 .032 .043 .049 .068 .070 ,304 ,341 ,500 ,570 ,770 ,876 1,216 1, .025 .035 .041 .055 .068 .075 .090 ,393 ,445 ,625 ,729 ,979 1,214 1,335 1,607 .009 .013 .018 .019 .035 .044 .054 .057 .072,161 ,232 ,329 ,339 ,625 ,786 ,964 1,018 1,2866 EATON Aerospace Group TF100-21D April 2013 Flared FittingsFittings are ordered by combining a nipple assembly and socket. Order each by part number. Example:Socket must be ordered under Eaton s part number AE24204/AE33767 (letter size code is the same as nipple assembly).Socket AE24204 (Size code: E through J)Socket AE33767 (Size code: K through R)Nipple Assembly Part NumberSocket Part NumberAE24850G + AE24204GNipple *ThreadTHexYWeight** (lbs.)StraightAE24850 E, G, H, JStraightAE36900 K through RAE25093 E, G, H, J45 Elbow45 ElbowAE37091 K through R90 ElbowAE25092 E, G, H, J90 ElbowAE36902 K through . . dimensions in A = Maximum length of fitting, including socket, when fitting is assembled on D = Nominal drop dimensions. Tolerance is .035 on bent tube fittings.*R = Radius of elbow measured to centerline.**Weight = nipple assembly plus socket (nominal).. Aerospace Group TF100-21D April 2013 7Hose Assemblies/Swivel Flared to Swivel Flared-4 thru-32-4 thru-32-4 thru-32-4 thru-32-4 thru-32-4 thru-32 A BAE641 Hose Assembly Base Hose (Silicone Cover) Assembly Base SizeConfigurationsAE541 Hose (Polyester Chafeguard) Assembly Base (Thin Wall Silicone Cover) Assembly Base A Part B Part to StraightStraight to 45 Straight to 90 45 to 45 45 to 90 90 to 90 AE1010556AE1010557AE1010558AE3948AE3949A E3950AE1010565*AE1010566*AE1010567*AE395 4*AE3955*AE3956*AE1010573AE1010651AE1010 652AE3972AE3973AE3974AE1014077**AE101407 8**AE1014079**AE5553**AE5554**AE5555**AE 24850(-4 thru -10)AE36900(-12 thru -32)AE24850(-4 thru -10)AE36900(-12 thru -32)AE24850(-4 thru -10)AE36900(-12 thru -32)AE25093(-4 thru -10)AE37091(-12 thru -32)AE25093(-4 thru -10)AE37091(-12 thru -32)AE25092(-4 thru -10)AE36902(-12 thru -32)AE24850(-4 thru -10)AE36900(-12 thru -32)AE25093(-4 thru -10)AE37091(-12 thru -32)AE25092(-4 thru -10)AE36902(-12 thru -32)AE25093(-4 thru -10)AE37091(-12 thru -32)AE25092(-4 thru -10)AE36902(-12 thru -32)AE25092(-4 thru -10)AE36902(-12 thru -32)*Contact Eaton for -32 (AE443) hose assembly part numbers. See page 8 for hose assembly part number information.** Not available in -32 EATON Aerospace Group TF100-21D April 2013 Flareless Fittings (NAS 1760)Distance to Sealing PointSocket must be ordered separately under Eaton s part number AE24204/AE33767 (letter size code is the same as nipple assembly).Socket AE24204 (Size code: E through J)Socket AE33767 (Size code: K through R)Nipple *ThreadTHexYWeight** (lbs.)StraightAE24851 E, G, H, JStraightAE34231 K through RAE25094 E, G, H, J45 Elbow45 ElbowAE36007 K through R90 ElbowAE24981 E, G, H, J90 ElbowAE36008 K through . . . dimensions in A = Maximum length of fitting, including socket, when fitting is assembled on D = Nominal drop dimensions. Tolerance is .035 on bent tube fittings.*R = Radius of elbow measured to centerline.**Weight = nipple assembly plus socket (nominal).K = Gauge point location per NAS Aerospace Group TF100-21D April 2013 9Hose Assemblies/Swivel Flareless to Swivel Flareless (NAS 1760)AE1010559AE1010560AE1010561AE3951AE 3952AE3953AE1010562*AE1010563*AE1010564* AE3957*AE3958*AE3959*AE1010653AE1010654A E1010655AE3975AE3976AE3977AE1014089**AE1 014090**AE1014091**AE5565**AE5566**AE556 7**AE24851(-4 thru -10)AE34231(-12 thru -32)AE24851(-4 thru -10)AE34231(-12 thru -32)AE24851(-4 thru -10)AE34231(-12 thru -32)AE25094(-4 thru -10)AE36007(-12 thru -32)AE25094(-4 thru -10)AE36007(-12 thru -32)AE24981(-4 thru -10)AE36008(-12 thru -32)AE24851(-4 thru -10)AE34231(-12 thru -32)AE25094(-4 thru -10)AE36007(-12 thru -32)AE24981(-4 thru -10)AE36008(-12 thru -32)AE25094(-4 thru -10)AE36007(-12 thru -32)AE24981(-4 thru -10)AE36008(-12 thru -32)AE24981(-4 thru -10)AE36008(-12 thru -32)*Contact Eaton for -32 (AE443) hose assembly part numbers. See page 8 for hose assembly part number information.** Not available in -32 thru-32-4 thru-32-4 thru-32-4 thru-32-4 thru-32-4 thru-32 A BAE641 Hose Assembly Base Hose (Silicone Cover) Assembly Base SizeConfigurationsAE541 Hose (Polyester Chafeguard) Assembly Base (Thin Wall Silicone Cover) Assembly Base A Part B Part to StraightStraight to 45 Straight to 90 45 to 45 45 to 90 90 to 90 10 EATON Aerospace Group TF100-21D April 2013 Hose Assembly Part Number InformationAssembly LengthAssembly length is measured from sealing surface to sealing surface. When defining the part number length, measure the length from gauge point to gauge point of NAS 1760 flareless fittings. The K dimensions on page 6 show the difference between overall length and length to gauge point. With elbow fittings, the measuring point is the intersection of the centerline of the elbow with the face of the sealing Length TolerancesUp to and including 18 inches: .125Above 18 inches, to and including 36 inches: .250Above 36 inches, to and including 50 inches: .500Above 50 inches: 1% of lengthRotational Angle MeasurementOn assemblies with an elbow fitting on each end, measure the rotation angle as shown. The index angle will follow the basic style hose assembly part number indicated (see example for double elbow assemblies). In all cases, the angle should be expressed in 3 digits. For example, 35 should be written as 035. If the angle desired is 0 , specify AssembliesTo properly specify the correct hose assembly, use the simple numbering system below. Straight and single elbow assemblies are identified by the number beginning with AE101 and double elbow assemblies are identified by a number beginning with AE39XX or AE55XX. Any assembly can be ordered using these :Straight and Single Elbow Hose AssembliesAE101XXXX G 0184Base number for all straight and single elbow assembliesSize Code (see below)Assembly length, in inches, always four digits; last digit indicates fractional length in 1/8 s of an Elbow Hose AssembliesAE39XX G 0184 -035Base number for all double elbow Code (see below).Assembly length, in inches, always four digits; last digit indicates fractional length in 1/8 s of an position angle, expressed in three Dash Size 4 6 8 10 12 16 20 24 32Letter Code E G H J K M N P REATON Aerospace Group TF100-21D April 2013 11FAILURE OR IMPROPERSELECTION,USE, OR ASSEMBLYOF THE PRODUCTS ANDCOMPONENTS FOR APPLICATIONS DESCRIBED HEREIN CAN RESULT IN POSSIBLE PROPERTY DAMAGE,PERSONAL INJURY OR document and any other related information from Eaton Aeroquip or its affiliates and authorized distributors, provide product options for consideration by Users having technical expertise with these products. Due to the wide variety ofapplications and operating conditions for these products and components, the User is solely responsible for making the final selection of the products and ensuring that all performance, safety and warning requirements for the User's intended application are met. Eaton Aeroquip recommends that Eaton Aeroquip hose, fittings orassembly equipment must be used only with other Eaton Aeroquip hose, fittings or assembly equipment,and Eaton Aeroquip and/or its affiliates disclaim any obligation or liability (including all incidental and consequential damages)to the extent Eaton Aeroquip hose, fittings or assembly equipment is used with any other manufacturer's hose, fittings orassembly equipment or in the event that Eaton Aeroquip recommended processes and product instructions for hose assemblies are not products described herein,including product features,specifications, designs, andavailability are subject to change at any time without 2013 EatonTeflon is a registered trademark of DuPontAll Rights ReservedCopying or Editing is ForbiddenForm No. TF100-21D(Supersedes AA42A)April 2013Eaton Aerospace Group Fluid & Electrical Distribution Division 300 South East Avenue Jackson, Michigan 49203-1972 Phone: (517) 787 8121 Fax: (517) 789 2947 EatonAerospace Group9650 Jeronimo RoadIrvine, California 92618Phone: (949) 452 9500Fax: (949) 452

Related search results