Example: bankruptcy

4 WAY (5/2) SOLENOID VALVE - IMI Precision

4 WAY (5/2) SOLENOID VALVE WITH BRASS, STAINLESS OR ALUMINUM HOUSING DIRECT ACTING Brochure 1611 SPECIFICATIONS: Solenoid Valve for air, oil, water and other fluids ...

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Text of 4 WAY (5/2) SOLENOID VALVE - IMI Precision

4 WAY (5/2) SOLENOID VALVEWITH BRASS, STAINLESS OR ALUMINUM HOUSINGDIRECT ACTINGBrochure 1611SPECIFICATIONS:Solenoid Valve for air, oil, water and other fluids compatible withvalve materials. For contaminated fluids, use of a filter may Size:1/4 NPTFlow Direction:Unidirectional flow pathsFlow Factor:Cv = Range:0 - 150 psiShifting Frequency:100 CPM (cycles per minute)Installation:Solenoid should be vertical (as pictured) forlongest RATING:Seal MaterialEnvironmentalFluidNBR (Nitrile)-15 F to 140 F-15 F to 175 FEPDM-40 F to 140 F-40 F to *FKM (Viton) 15 F to 140 F 15 F to ** Max. Fluid - 200 F / oil - 250 F/ gas - 300 FFEATURES: High flow. Valve internals are stainless steel and brass. Direct acting, solenoid operated. No minimum pressure drop required. Suitable for use on : Wide variety of solenoids including hazardous location and UL, CSA, FM, CENELEC and other international listings. G thread ports - parallel threads per ISO 228/1 and BSPP. Manual override and manual reset SymbolValve shown with hazardousduty coil, integral 1/2 NPTconduit hub, and 18 shown with generalpurpose solenoid and 1 SymbolsFig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Solenoid Internal Wiring Schematics2Order Information Table A - ValvesOrder Information Table B SolenoidsNotes:(1) These are maximum solenoid temperatures. The actual permissible temperature for the valve assembly must not exceed the temperature ratings shown in specifications on page 1.(2) These solenoids include a DIN 43650-A connector with a Pg 11 cable clamp for round cable. Fits wire cable 5/32 to 7/16 diameter. For other connector types such as 1/2 NPT and lighted consult HERION Brochure PartsValve Variationswithoutsolenoid(lb.)Spare PartsKitOrder Number (1)ValveBrassBrassBrassBrassNBRNBRNBRNBR Brass/430F SSTBrass/430F SSTBrass/430F SSTBrass/430F SSTStandard - BrassWith Reset (2) (See Fig. 9)Push Button Manual Override (See Fig. 9)Locking Manual Override (See ) SST316 SST316 SST316 SSTFKMFKMFKMFKM316/430F SST316/430F SST316/430F SST316/430F SSTStandard - Stainless SteelWith Reset (2) (See Fig. 9)Push Button Manual Override (See Fig. 9)Locking Manual Override (See Fig. 10) SSTStandard - SSTBrass/430F SSTBrass/430F SSTBrass/430F SSTStandard BrassWith Reset (2) (See Fig. 9)Push Button Manual Override (See Fig. 9)Locking Manual Override (See Fig. 10) SST316/430F SSTStandard - Brass (EEx d IIC T5/T6) (3)Standard - Stainless Steel (EEx d IIC T5/T6)(3) Temperat ur e (1)WeightSolenoidDimensionsSolenoidSchem aticHazardous Location ApprovalsNumberAC(VA)DC(W)FluidAmbient(l b.)Fig. (2)--16+175 F+130 ,122----3804(2)18--+175 F+140 ,123----3616--146CENELEC361716--+140 F+140 d IIC T5/T63980--12+113 F (T6)+113 F (T6)4CENELEC398113--+140 F (T5)+140 F (T5) em II T5/T63826--132382715--+175 F+130 F .84153LR 57643-6 File I Division 1,2 Groups A,B,C,DClass II Division 1,2 Groups E,F,GClass III Division 1,2Notes:(1) Order solenoid from Table B below.(2) Upon electrical failure, valve will trip. Restore power and then manually engage reset button on the bottom of the valve. Valves with reset must be ordered with this feature from the factory. The reset cannot be added to an existing valve.(3) Used with Solenoids 3616 and SECTION DRAWINGS:Fig. 8 Valve and SolenoidFig. 10 Locking Style Manual OverrideFig. 9 Push Button Style Manual Overrideand Manual Reset OptionsPARTS LIST (not shown) Valve Plate*4O-Ring Tube * Valve Plate Tab (not shown) Screw (not shown) Nut* Assy. Ring* * Seat* * * * Ring :The parts marked with an asterisk are contained in the spare parts kit. When orderinginclude Valve Model DIMENSIONS:Fig. 11 Standard Valve shown with 0801, 3804 SolenoidFig. 12 0801, 3804 SolenoidsFig. 13 3980, 3981 SolenoidsFig. 14 3616, 3617 SolenoidsFig. 15 3826, 3827 SolenoidsHERION USA Inc. 176 Thorn Hill Road Warrendale PA 15086Phone: Fax: 4/2002Note: All dimensions in mm (inches).

Related search results